Customer Reviews

4.93 out of 5
See all 1217 reviews
Write a Review
  • All Reviews (1217)
  • Image (155)
  • Video (2)
  • All Star
    • All Star(1217)
    • 5 Star(1152)
    • 4 Star(51)
    • 3 Star(10)
    • 2 Star(1)
    • 1 Star(3)
Sort by:
Top Review
  • Top Review
  • Most Helpful
  • Most Recent
Reviews only from your country (New Zealand)
|
Show Original

A part of the review has been auto-translated.

  • 12/02/2017

    I first tried the dotMatrix on the Arduino with the Sprite and Matrix libraries. I got funny results because the column adressing is reversed. Therefore I switched to the MD_MAX72xx libraries. Make sure to change the define in the MD_MAX72xx. h file to read: #define USE_FC16_HW 1 I used the MD_Keyswitch library found at https://github.com/MajicDesigns/MD_KeySwitch and the MD_MAX72xx library found at https://github.com/MajicDesigns/MD_MAX72XX Then I pulled the source at https://github.com/MajicDesigns/MD_MAX72XX/blob/master/examples/MD_MAX72xx_ScrollChart/MD_MAX72xx_ScrollChart.ino With that you should be able to get it to work. If you use pins that are not-SPI standard, make sure to activate the call to MD_MAX72XX with four parameters, and comment out the one with two parameters.

    Comments (2)
    Show Original
  • 19/12/2020

    very good product and good price. If you don't know how that work i found one good tutorial. https://www.makerguides.com/max7219-led-dot-matrix-display-arduino-tutorial/ If you try the programs and see that they do not work with the first one. Try changing the names of the pins you will use and reload the program on Arduino. e.g. CS_PIN 10 DATAPIN 11 CLK_PIN 13

    Comments
    Show Original
  • 02/02/2019

    made it work with an Esp8266 board easily. good for the project I'm doing.

    Comments (1)
    Show Original
  • 07/11/2019

    Excellent product. Thank you Banggood. Tip: If you use the MD_parola & MD_MAX72xx libraries, use #define HARDWARE_TYPE MD_MAX72XX::FC16_HW

    Comments
    Show Original
  • 04/02/2019

    hello everyone Watch the photos :)

    Comments (1)
    Show Original
  • 24/12/2018

    A lot of fun to play around with. I used two of them for scrolling messages through the window. (see pictures) Tip: If you use the MD_parola & MD_MAX72xx libraries, use #define HARDWARE_TYPE MD_MAX72XX::ICSTATION_HW for these.

    Comments
    Show Original
  • 15/05/2018

    watch the video from great projects max7219/1088as led matrix and all should be fine :) I first plugged in 3v by mistake. the display was erratic. perfect on 5v

    Comments
    Show Original
  • 21/02/2019

    matrice led , funziona Ok , difficile da fare funzionare , io sono riuscito con la libreria (md_max72xx.h) con : vedere foto.

    Comments (6)
    Show Original
  • 09/06/2018

    watch the video from great projects max7219/1088as led matrix

    Comments
    Show Original
  • 03/05/2019

    all the Led matrix located at the end lifted by the 4 pins connector, making all 4 display not horizontally flat.Package protected by foam, so no breaking.

    Comments (1)
    Show Original
Show:

    Total 0 pages

    Go to page

    Go

    You might be interested in

    recommendation for you
    • US$11.36
    • US$8.99
    • US$10.34
    • US$25.51
    • US$14.94
    • US$11.49
    • US$4.01
    • US$17.24
    • US$4.99
    • US$39.09
    • US$13.79
    • US$13.79
    • US$16.09
    • US$6.89
    • US$64.39
    • US$44.84
    • US$17.24
    • US$18.99