A part of the review has been auto-translated.
Well packaged, received in good condition and excellent delivery time (12 calendar days from order). The ESP32CAM is one of my favorite micro-controllers. I find it useful to have a SD card reader built in, but it does mean there's a shortage of GPIO pins. The other main issue is that you normally need to program it with a FTDI chip. The MB option gets round this neatly - just plug the EDP32cam into the motherboard and you can program it over the USB port. Ransom nerd have a good description of this board and associated tutorials. I am happy to recommend this MCU.
The product works fine with the originally uploaded code, but when I upload my own code I got an error message 0x20002 which means that camera pin setting is wrong. I tried many setups without success. WHAT IS THE PINOUT for the pins used by the camerajQuery111303389024727909917_1639075977269?
Nice and useful board
He's here
It's okay
At the first view I was disappointet because the IO0 button for programming is missing. But when testing the ESP32-CAM with the Ardiono IDE the programm can be loaded without any problem in the configuration I received. The CAM is a cheap one and cannot be focused. But you can buy a more expensive one that can be focused and the pictures and videos will be of a much better quality. The delivery was very fast - as usual for BANGGOOD.. I can recommend the product.
Még nem használtam, mert még minden feltétel adódott meg az elképzeléseimhez. Gyorsan hiánytalanul megérkezett.
Delivered very quickly. Both ESP32-CAMs run with the installed software as AP. The modules go into download mode when plugged in, press reset, then run. The Arduino-Sketch Example/ESP32/Camera/CameraWebServer runs with the following settings: Board: ESP32 Wrover Module Partition Scheme: Huge APP (3MB....) in the sketch: #define CAMERA_MODEL_AI_THINKER, ssid and password, then the ESP32CAM runs on its own network. Tested with Arduino-IDE 1.8.19 and Espressif-esp32 2.0.3
very good, you can use the metal sd card slot as heatsink for the camera, the antenna is ok, but is a bit difficult to replace the 0 ohm resistor for the antenna switching
All is ok ! Fast shipping and delivery