Comments

aggalitsas Is it at least high CRI and more importantly, what is the maximum sustained level,ie for 20 minutes?

Wieselflinkpro 31/08/2023
1
Comments (3)

aggalitsas Areyou sure you are hitting Turbo on the FT03s? Double click from ON? With default Anduril settings the light will not ramp all the way to max (Turbo), it will stop at 120/150 level. There is no way that the 2 LEDs are equal in brightness, I also own FT03-FT03s, and my SBT90.2 blows the XHP50.2 right out of the water.

mpoplo 30/10/2023
3
Comments (2)

aggalitsas Turnthe light on, then tap the switch (half click) 20 times quickly. It will stop responding for half a second and it will "normal-flash 1 time buzz-flash". Tap again to choose that and enter sub-option menu 1, where you can change mode group. Now the light will start to flash, 1 time for option 1 ( the one you are currently using), then 2 times for option 2 (0.1%, 1%, 10%, 35%, 100% output - try this one, works best for me), then 3 times for option 3 and so on, up to 12. Tap to choose the right one for you and the light will go to the first setting of that mode. Check out the instructions in the description above.

BG481636401 06/10/2023
0
Comments (1)