beautiful model 🤗🤗🤗🤗🤗

krásný model 🤗🤗🤗🤗🤗

beautiful model 🤗🤗🤗🤗🤗

Thank you for purchasing everyone I RECOMMEND this store.

Děkuji za nákup všem tento obchod DOPORUČUJI.

Thank you for purchasing everyone I RECOMMEND this store.

Collissimo, very well packed. Airplane in EPP, tested with cyano. Well painted, just the leading edge of the back plane that lacks a bit of paint. I've got to get him out of here. Careful, there's no train. The air intake under it will charge.

Collissimo, Très bien emballé. Avion en EPP, testé avec la cyano. Bien peint, juste le bord d'attaque du plan arrière qui manque un peu de peinture. Il me reste à l'equiper. Attention, il n'y a pas de train. La prise d'air dessous va charger.

Collissimo, very well packed. Airplane in EPP, tested with cyano. Well painted, just the leading edge of the back plane that lacks a bit of paint. I've got to get him out of here. Careful, there's no train. The air intake under it will charge.

sveikas,gražus,viskas ok

sveikas,gražus,viskas ok

sveikas,gražus,viskas ok

Great item, fast shipping!

Great item, fast shipping!

Great item, fast shipping!

the kit arrived fast and well packed. the plane is made of EPS, not durable at all. No instructions, so know what you're getting into. The motor bay is too deep for basic drone motors, I printed a motor mount to fit (18mm tall, to fit a cheap 2205). servo spaces are for 9g servos. There is quite a bit of DIY to get it right. even with light electronics and a 450mah 3s(and had to enlarge the compartment inside. The propeler, if I remember correctly has a 2mm hole, not 3.17mm like someone wrote in his review. so 2mm with a hex nut insert hole. I just used my own 5x5 prop. I needed extra 20g of weight on the nose for good CG. flies decent and quite fast, I'd say stall speed is ~30km/h, but needs at least 40 to respond ok to commands. I got AUW at 350g, with the 2205 2400kv motor running a 5x5 prop, on 3s 450mah lipo does a good vertical. enough power to get out of a stall that can happen quite easy at slow flight. Definitely not for first time flyers nor builders.

the kit arrived fast and well packed. the plane is made of EPS, not durable at all. No instructions, so know what you're getting into. The motor bay is too deep for basic drone motors, I printed a motor mount to fit (18mm tall, to fit a cheap 2205). servo spaces are for 9g servos. There is quite a bit of DIY to get it right. even with light electronics and a 450mah 3s(and had to enlarge the compartment inside. The propeler, if I remember correctly has a 2mm hole, not 3.17mm like someone wrote in his review. so 2mm with a hex nut insert hole. I just used my own 5x5 prop. I needed extra 20g of weight on the nose for good CG. flies decent and quite fast, I'd say stall speed is ~30km/h, but needs at least 40 to respond ok to commands. I got AUW at 350g, with the 2205 2400kv motor running a 5x5 prop, on 3s 450mah lipo does a good vertical. enough power to get out of a stall that can happen quite easy at slow flight. Definitely not for first time flyers nor builders.

the kit arrived fast and well packed. the plane is made of EPS, not durable at all. No instructions, so know what you're getting into. The motor bay is too deep for basic drone motors, I printed a motor mount to fit (18mm tall, to fit a cheap 2205). servo spaces are for 9g servos. There is quite a bit of DIY to get it right. even with light electronics and a 450mah 3s(and had to enlarge the compartment inside. The propeler, if I remember correctly has a 2mm hole, not 3.17mm like someone wrote in his review. so 2mm with a hex nut insert hole. I just used my own 5x5 prop. I needed extra 20g of weight on the nose for good CG. flies decent and quite fast, I'd say stall speed is ~30km/h, but needs at least 40 to respond ok to commands. I got AUW at 350g, with the 2205 2400kv motor running a 5x5 prop, on 3s 450mah lipo does a good vertical. enough power to get out of a stall that can happen quite easy at slow flight. Definitely not for first time flyers nor builders.

The airplane kit arrived in good condition from US warehouse. It will be fun building it up. Thank you Banggood!

The airplane kit arrived in good condition from US warehouse. It will be fun building it up. Thank you Banggood!

The airplane kit arrived in good condition from US warehouse. It will be fun building it up. Thank you Banggood!

A nice plane

Ładny samolot

A nice plane

Nice model, but strange material. Let's see if it holds up in the air after RC conversion.

Schönes Modell, aber seltsames Material. Mal schauen ob es sich in der Luft hält nach RC Umbau.

Nice model, but strange material. Let's see if it holds up in the air after RC conversion.

beautiful plane with a price 33,90 €

krásne lietadlo dobá cena 33,90 €

beautiful plane with a price 33,90 €