Customer Reviews

4.64 out of 5
See all 39 reviews
Write a Review
  • All Reviews (39)
  • Image (5)
  • Video (0)
  • All Star
    • All Star(39)
    • 5 Star(33)
    • 4 Star(2)
    • 3 Star(1)
    • 2 Star(2)
    • 1 Star(1)
Sort by:
Top Review
  • Top Review
  • Most Helpful
  • Most Recent
Reviews only from your country (New Zealand)
|
Show Original

A part of the review has been auto-translated.

  • 01/03/2022

    Good tiny platform that has yet to be explored and made use of. Has demo code loaded in and works out of the package.

    Comments (4)
    Show Original
  • 18/02/2022

    really nice little board, I’m running MicroPython on it, and have a blog series. shared code on GitHub as fivebyfive project.

    Comments
    Show Original
  • 18/02/2022

    absolutely brilliant.

    Comments
    Show Original
  • 15/02/2022

    Arrived well packed. Everything according to description!

    Comments
    Show Original
  • 08/06/2022

    /* TESTED ON ARDUINO IDE https://github.com/01Space/ESP32-C3FH4-RGB -> Error 5 at address 0x01//using sh1.0mm plug hardcoded pins= -> SCL= 9 -> SDA= 8//seem conflicting with led pin -> MISO= 5 -> MOSI= 6 -> SS= 7 -> SCK= 4 upload requiert a push on the B key usbc on boot =enabled board seting for enable console serial.printg g not found other way to enable console than uploading a script without pushing the B key still the setup serial.print dont show -> Scanning for I2C devices ... -> No I2C devices found not found ss1306screen on i2C disabling the led matrix not more bring ic2 error guess ic2 and led matrix share the same pin 8 */

    Comments
    Show Original
  • 17/01/2022

    The ESP32-C3 board arrived 4weeks earlier than announced. Test it with Arduino IDE 1.8.19 and ESP32 SDK 2.0.2. Programming mode is as always, hold down Userbutton(GPIO9) and press reset(chip_en). LED's, Wifi work as AP / Client+Webserver and BT. I am still working on connecting native USB to the serial monitor of the Arduino IDE. Note: The board only works with a USB-C to USB-A cable. With USB-C cable no power supply!(tested with power supply, computer, smartphone)

    Comments (1)
    Show Original
  • 15/06/2022

    Great card, too bad for the difficulty of implementing the I2C sensors. The 4-pin port requires special cables, also in both cards after a few tests the i2C interface stopped working completely. I'll try to install firmware and IDE all over again and try on another computer to see if it's a compilation error or a card flaw. however it is still very interesting the packaging, for the cost they have they are perfect for hobby and fun.

    Comments
    Show Original
  • 31/03/2022

    Once again iI have received an item that does not work correctly. This is the 4th of these items that has not functioned correctly and you have done nothing to help me. Not even a reply!

    Comments (2)
    Show Original
  • 09/02/2022

    Received it fast and was impressed by the size. Getting it to work though took longer than expected. The code provided by the GitHub repository is not working. See my GitHub fork for fixes / details.

    Comments
    Show Original
  • 20/04/2022

    Very nice, little development board with little neopixels. Show pretty demo out-of-the-box (Arduino code). Flashed one with micropython and have to explore more soon.

    Comments
    Show Original
Show:

    Total 0 pages

    Go to page

    Go

    You might be interested in

    recommendation for you
    • US$2.79
    • US$2.99
    • US$2.40
    • US$2.86
    • US$6.20
    • US$4.59
    • US$5.74
    • US$8.04
    • US$5.99
    • US$3.44
    • US$2.29
    • US$2.29
    • US$2.29
    • US$2.29
    • US$4.59
    • US$3.99
    • US$2.44
    • US$21.99