Quality is good. The layout of the servos and horns is better than the 800m rainbow and the supplied linkage is better. The only real problem is that there is only really one carbon fibre support on the middle of the wing. On my maiden flight I tried to do a roll with the throttle probably a bit high and the wing folded and snapped about 2cm away from the motor mount/battery box thing. The support had given in and bent. I fixed it up with some glue and disposable chopsticks. ;) If they ever come back in stock I'll buy another and probably replace the support across the middle of the wing with a longer 10mm square CF tube to give it more of a chance.

Quality is good. The layout of the servos and horns is better than the 800m rainbow and the supplied linkage is better. The only real problem is that there is only really one carbon fibre support on the middle of the wing. On my maiden flight I tried to do a roll with the throttle probably a bit high and the wing folded and snapped about 2cm away from the motor mount/battery box thing. The support had given in and bent. I fixed it up with some glue and disposable chopsticks. ;) If they ever come back in stock I'll buy another and probably replace the support across the middle of the wing with a longer 10mm square CF tube to give it more of a chance.

Quality is good. The layout of the servos and horns is better than the 800m rainbow and the supplied linkage is better. The only real problem is that there is only really one carbon fibre support on the middle of the wing. On my maiden flight I tried to do a roll with the throttle probably a bit high and the wing folded and snapped about 2cm away from the motor mount/battery box thing. The support had given in and bent. I fixed it up with some glue and disposable chopsticks. ;) If they ever come back in stock I'll buy another and probably replace the support across the middle of the wing with a longer 10mm square CF tube to give it more of a chance.

As it came, and as indicated by others, this wing is way too flimsy to fly as it has absolutely no rigidity across the wing in beam strength or torsional strength. I did manage to fix this problem by adding 11 lengths of 2mm CF rod to the upper and lower surfaces, and one of these from the outer hinge point diagonally across to the colour edge in front of the servo mount. I have a total of 6 across the centre line, 2 on top and four underneath (one original), and two running full length down each wing along the coloured edge on the top side, also one in each elevon. It now flies extremely well, worth the effort, no perceivable flutter, and with a DYS 1806 2300kv motor I can get an hour with the 3ah liion 2s pack, with a bit of thermal. If you like modding, it is a great wing, just don't expect much stock performance before it folds up.

As it came, and as indicated by others, this wing is way too flimsy to fly as it has absolutely no rigidity across the wing in beam strength or torsional strength. I did manage to fix this problem by adding 11 lengths of 2mm CF rod to the upper and lower surfaces, and one of these from the outer hinge point diagonally across to the colour edge in front of the servo mount. I have a total of 6 across the centre line, 2 on top and four underneath (one original), and two running full length down each wing along the coloured edge on the top side, also one in each elevon. It now flies extremely well, worth the effort, no perceivable flutter, and with a DYS 1806 2300kv motor I can get an hour with the 3ah liion 2s pack, with a bit of thermal. If you like modding, it is a great wing, just don't expect much stock performance before it folds up.

As it came, and as indicated by others, this wing is way too flimsy to fly as it has absolutely no rigidity across the wing in beam strength or torsional strength. I did manage to fix this problem by adding 11 lengths of 2mm CF rod to the upper and lower surfaces, and one of these from the outer hinge point diagonally across to the colour edge in front of the servo mount. I have a total of 6 across the centre line, 2 on top and four underneath (one original), and two running full length down each wing along the coloured edge on the top side, also one in each elevon. It now flies extremely well, worth the effort, no perceivable flutter, and with a DYS 1806 2300kv motor I can get an hour with the 3ah liion 2s pack, with a bit of thermal. If you like modding, it is a great wing, just don't expect much stock performance before it folds up.