Customer Reviews

4.81 out of 5
See all 517 reviews
Write a Review
  • All Reviews (517)
  • Image (70)
  • Video (1)
  • All Star
    • All Star(517)
    • 5 Star(459)
    • 4 Star(37)
    • 3 Star(10)
    • 2 Star(2)
    • 1 Star(9)
Sort by:
Top Review
  • Top Review
  • Most Helpful
  • Most Recent
Reviews only from your country (New Zealand)
|
Show Original

A part of the review has been auto-translated.

  • 08/02/2019

    fantastico, tutto in uno PDP e flight controller f4, risparmi tempo e saldature. attenzione, poco spazio per saldare cavi trasmettitore e video.

    Comments
    Show Original
  • 04/02/2019

    great board easy to work with

    Comments
    Show Original
  • 16/11/2017

    1. Make sure you add a capacitor to the battery pads 2. If you want telemetry for FrSky, you'll need to: a) Connect SBUS to the SBUS pad b) Implement the SmartPort telemetry invert mod hack on the XSR c) Wire the telemetry wire on the XSR to the TX6 pad on the StarF4S d) Open BetaFlight and type this into the CLI: / resource MOTOR 5 NONE / resource LED_STRIP NONE / resource resource serial_tx 11 A01 3. Recommend getting an additional regulator to clean up the video feed.

    Comments
    Show Original
  • 30/07/2017

    Flashed in BF 3.2 using OMNIBUSF4 and it works great. Pushing 4x 2205 rotor geeks very well. Minor video banding in the video if you feel your camera/vtx off the board. Overall very pleased and does what I really wanted, which was F4, OSD, ESC all in one board. You have to take off the protective plastic and the sticker if you want to access all of the pads and solder everything up. BUY IT

    Comments (1)
    Show Original
  • 14/09/2017

    Racerstar F4S includes 5v 3a bec, which makes adding all your typical accessories a snap. Don't forget to add a 470u 25-35v Cap to clean out those nasty voltage spikes, which saves your Bec from premature death and cleans up the video noise.

    Comments (2)
    Show Original
  • 20/11/2017

    J utilise cette carte sur un setup light en moteur 2205 2700kv (cf photos) De bonne performance globalement assez fiable car je l utilise maintenant depuis quelques mois sans aucun problème Sur les conseils d amis ayant la même fc j ai renforcé la prise usb à la colle chaude (cf photos) À noter : l ajout d un condensateur 25v 470uf a bien amélioré ma vidéo par contre

    Comments
    Show Original
  • 05/08/2017

    Montée sur une frame Armattan 130. Ne fonctionne pas en PPM seulement en SBus. Impossible de trouver une astuce pour brancher un récepteur ou satellite spektrum. Sinon bonne carte très compact, à voir dans la durée.

    Comments (1)
    Show Original
  • 22/09/2017

    I've had some problem binding it to a DSMx PPM Rx, none of the uarts were doing the job. After bashing my head against this wall for a few days, i gave up. Pairing it to a SBUS receiver (Frsky XM+ Micro D16), worked imminently, and i haven't had any problems with it since. As such, if you are using an SBUS receiver i can definitely recommend this fc. PWM receivers are incompatible. And if you are using any other type of receiver i would suggest the Racerstar StarF3S as it seems people are having fever problems pairing non-SBUS receivers with these.

    Comments
    Show Original
  • 13/02/2019

    used this in the uavfutures 99 dollar build. works great! 30a esc is plenty and f4 board is very accurate.

    Comments (1)
    Show Original
  • 04/10/2017

    I am using my StarF4S on a small 4" build. It was a great way to keep the number of boards down so that I had room for a RunCam Split. I like the placement of the USB socket as it makes it easy to get to. I also like the through holes for the motor connections as it makes it easy to solder them in from underneath the flight controller. I would really like to have access to two UARTs in addition to the one that is taken up by the receiver. Especially as there is no black box device on this flight controller, the lack of UARTs makes it impossible to connect an external logger.

    Comments
    Show Original
Show:

    Total 0 pages

    Go to page

    Go

    You might be interested in

    recommendation for you
    • US$11.99
    • US$41.39
    • US$80.49
    • US$18.39
    • US$29.89
    • US$15.99
    • US$45.99
    • US$22.99
    • US$126.49
    • US$19.54
    • US$7.77
    • US$13.79
    • US$25.49
    • US$37.94
    • US$109.24
    • US$80.39
    • US$50.02
    • US$10.34