cirorodrigues
My Contents
All Messages
Reviews
Comments
Answers
Questions

All Messages

cirorodrigues 03/07/2021
very nice product, fantastic finish, it's a bit overkill for a hot gun but why not? it's probably the most awesome hot gun available! 😆 When in use, it leaves a thin patch of glue, around 1 or 2 mm diameter, what is very good for small works and details. I'm very pleased with it.
Wowstick Mini Electric Hot Melts Glue Pen Gluer 2000mAh Cordless Portable DIY Art Craft Glue Guns W/ 20pcs Glue Sticks
US$34.49 US$27.99
0
Recommendations
Comments (0)
ESP32-CAM WiFi + bluetooth Camera Module Development Board ESP32 With Camera Module OV2640 Geekcreit for Arduino - products that work with official Arduino boards
US$16.09 US$23.99

Q: Hello, this module have the correct chip AI thinker?

Asked by BG181613554 on 2020-10-15 12:15:41

cirorodrigues talvez, mas não usei

2021-06-11 09:41:53 Helpful (0)
Submit
Answers (6)
Xiaomi Wowstick 1F+ 64 in 1 Electric Screwdriver High Precision USB Charging LED Light 56 Alloy Steel Batch Heads Ideal for DIY and Home Repair
US$42.99 US$79.99

Q: does it have a magnetic tip?

Asked by coolpoop9870 on 2020-08-03 11:15:13

cirorodrigues sim, vem com um acessório para magnetizar as pontas.

2021-06-11 09:41:05 Helpful (0)
Submit
Answers (41)
cirorodrigues 26/02/2020
Very nice lamp. Materials seem good enough, I guess it's steel, because of its weight and rigidity. It came almost fully assembled, I just needed to connect the led ring part to the upper arm, what was a easy thing. Once assembled, it keeps correctly the position, screws don't need to be forced, and this indicates a good balance between arms length, weight and springs, I understand the design was careful and correct. The led ring is not too bright but probably it'll be enough to help reading and do so detail work as it won't be the main light for the room. Leds can be adjusted to three different color temperatures ('white', 'yellow' and a mix of both), and can be dimmed as well, using a control in the USB cable. This lamp requires a powered USB port to be attached to (it's not included!), and I used generic spare one I had at hand, with good result. Magnifying glass is fair enough, large, and quite clean at center but is seems to have some distortion at borders, as usual. I'll see later if it helps with some practical work. Overall, good product.
DANIU Flexible Desk Large 5X USB LED Magnifying Glass 33cm+33cm Bracket 3 Colors Illuminated Magnifier Lamp Loupe
US$25.99 US$43.99
1
Recommendations
Comments (0)
cirorodrigues 31/01/2020
Very good tool. It's well built, good grip in the handles and can be adjusted to several wires diameter. There a nut to adjust for wire diameter, and it's sensitive, a little rotation changes a lot in the "claws". I tested it with 2.5 and 1.5mm wires and it's very easy to strip. I tried with thin wire (~ 0.75mm) and it was able to strip but I needed to pull the wire, maybe I couldn't adjust it correctly, but the left claw was not able to pull the wire. Overall, great tool for the price.
Multifunctional Automatic Wire Stripper Crimping Plier 210mm Efficient Wire Stripping and Terminal Crimping Tool for Insulated and Non-Insulated Terminals Easy to Use
US$13.99 US$19.99
1
Recommendations
Comments (1)
cirorodrigues 19/11/2020
Very good. I used it to make a security camera and it worked well. For the price, it's quite impressive what this little device can do. It has the camera interface, but it's possible also to setup sensors. Code is upload through Arduino IDE and there's even examples with working webserver. Just need to install esp32 cam add on to Arduino IDE, there are many tutorials in internet, I recommend "Random Nerd Tutorial", they have very good ones.
ESP32-CAM WiFi + bluetooth Camera Module Development Board ESP32 With Camera Module OV2640 Geekcreit for Arduino - products that work with official Arduino boards
US$16.09 US$23.99
1
Recommendations
Comments (0)
cirorodrigues 28/09/2020
I'm very satisfied with this printer, it has a good price, delivery was fast and print quality is very good, even I never printed anything before, did no special adjustments beforehand and I just took default values. The design is good, not many exposed parts and cables are neatly organized. However, I wouldn't recommend it for someone who's not willing or able to assemble it, as it came in a box full of parts, nuts, bolts, cables, and much other stuff. It took me several hours to assemble, following a very detailed video from SuperTechDan (look for it in Youtube), which I strongly recommend for the buyers, and it really requires to put hands-on and be careful not to damage any part. I think this is part of the fun and provides a clear understanding of all parts, but if you want something to print after 30 minutes, I suggest you look for another model instead.
HOMERS/TEVO® Tarantula Pro 3D Printer Kit with 235x235x250mm Printing Size MKS GenL Mainboard 0.4mm Volcano Nozzle Support 1.75mm Filament
US$264.49 US$434.76
8
Recommendations
Comments (4)

cirorodrigues sim, é uma Makerbase MKS SGen L de 32 bits

cirorodrigues 28/09/2020
I'm very satisfied with this printer, it has a good price, delivery was fast and print quality is very good, even I never printed anything before, did no special adjustments beforehand and I just took default values. The design is good, not many exposed parts and cables are neatly organized. However, I wouldn't recommend it for someone who's not willing or able to assemble it, as it came in a box full of parts, nuts, bolts, cables, and much other stuff. It took me several hours to assemble, following a very detailed video from SuperTechDan (look for it in Youtube), which I strongly recommend for the buyers, and it really requires to put hands-on and be careful not to damage any part. I think this is part of the fun and provides a clear understanding of all parts, but if you want something to print after 30 minutes, I suggest you look for another model instead.
HOMERS/TEVO® Tarantula Pro 3D Printer Kit with 235x235x250mm Printing Size MKS GenL Mainboard 0.4mm Volcano Nozzle Support 1.75mm Filament
US$264.49 US$434.76
8
Comments (4)
HOMERS/TEVO® Tarantula Pro 3D Printer Kit with 235x235x250mm Printing Size MKS GenL Mainboard 0.4mm Volcano Nozzle Support 1.75mm Filament
US$264.49 US$434.76

Q: I am turkey so ı need to EU plug. Is EU plug ?

Asked by gurtekin_ferdi on 2019-11-23 04:18:59

cirorodrigues Igot mine with EU plug, just order as that.

2020-11-19 12:11:48 Helpful (0)
Submit
Answers (4)
ANENG Q1 9999 Counts True RMS Digital Multimeter AC DC Voltage Current Resistance Capacitance Temperature Tester Auto/Manual Raging with Analog Bar Graph
US$32.99 US$51.99

Q: after turning the power off and then on, in which measurement mode is the multimeter?

Asked by Vladimir on 2018-06-02 10:34:02

cirorodrigues Itstarts as DC volts, auto range.

2020-11-19 12:11:15 Helpful (0)
Submit
Answers (4)
HOMERS/TEVO® Tarantula Pro 3D Printer Kit with 235x235x250mm Printing Size MKS GenL Mainboard 0.4mm Volcano Nozzle Support 1.75mm Filament
US$264.49 US$434.76

Q: Does this product have stock in Brazil?

Asked by BG543610848 on 2020-11-13 09:09:35

cirorodrigues Byend 2020, no.

2020-11-19 12:10:40 Helpful (0)
Submit
Answers (2)
Xiaomi Wowstick 1F+ 64 in 1 Electric Screwdriver High Precision USB Charging LED Light 56 Alloy Steel Batch Heads Ideal for DIY and Home Repair
US$42.99 US$79.99

Q: se comprar ainda tem que pagar uma taxa para tirar do correio ?

Asked by danieldesouzasi on 2019-12-11 08:28:21

cirorodrigues Separar na Receita Federal e taxarem, sim, vai pagar a taxa dos Correios E o imposto de importao, E talvez ICMS.

2020-09-28 12:26:14 Helpful (0)
Submit
Answers (17)
DANIU Flexible Desk Large 5X USB LED Magnifying Glass 33cm+33cm Bracket 3 Colors Illuminated Magnifier Lamp Loupe
US$25.99 US$43.99

Q: At what voltage is the light operating? 120V or 230V or, even, both voltages?

Asked by Otto on 2019-11-12 10:49:32

cirorodrigues it's powered by any usb charger

2020-08-08 01:38:56 Helpful (1)
Submit
Answers (8)
cirorodrigues 10/01/2020
Product arrived well packaged and in good shape. It's a kit composed of several parts: electric screwdriver, three sets of bits, magnetic mat, a base, a small glass with tiny screws, a magnetizer/demagnetizer, a suction cup, a plastic tool for open plastic cases, a nice case to store the screwdriver and one set of bits and a short usb cable for recharge. It's all well finish, and screwdriver is light and confortable for use. There's a led in the point and it will light up when buttons are pressed. Keep in mind this is a precision tool for lightweight job, it doesn't have a strong tork, it won't go against to tight screws or to big ones. I could unscrew some harder ones by manually moving the tool as a regular screwdriver, but I'm not sure if this may damage the inner parts, so I wouldn't force it too much. Otherwise, it's quite convenient, easy to use and nice.
Xiaomi Wowstick 1F+ 64 in 1 Electric Screwdriver High Precision USB Charging LED Light 56 Alloy Steel Batch Heads Ideal for DIY and Home Repair
US$42.99 US$79.99
0
Recommendations
Comments (0)
cirorodrigues 11/10/2019
Useful stand, simple and straightforward.
MINI M-Stand Soldering Iron Stand Bracket Holder
US$3.26 US$4.35
0
Recommendations
Comments (0)

You are the expert,can you help?

We sincerely invite you to subscribe to the Invite Answer email!

If you subscribe, we will invite you via email to answer questions people have about products. By subscribing you]ll also earn the "Helpful Badge"! You can unsubscribe at any time on the privacy settings page.

Help others and be happier!

  • Subscribe

About Badges

Badges are related to the community, and users earn badges by creating quality content, completing missions, or by participating in special activities.Specific people will also have their own exclusive badge.
CEO Badge

The CEO Badge is owned only by the boss of Banggood.

Badges you can earn are coming soon
  • OK

About Badges

Badges are related to the community, and users earn badges by creating quality content, completing missions, or by participating in special activities.

Helpful Badges

The Badge is awarded to users who are subscribed to the Invite Answer email and signifies their gratitude to help others. The badge appearance upgrades as the user helps more people.
  • OK

Thank you for subscribing! You have also earned a badge!

  • View It

Thank you! Your answer will help ###name### and ###num### other people!

Check awaiting answers to see more people who need help.

  • OK

Thank you! Your answer will help ###name### and ###num### other people!

Subscribe to "Invite Answer"emails and help others with product questions will earn you "Helpful Badge"!

  • Subscribe

Are you ready to help?

We invite you to subscribe to our Invite Answer email!

Subscribe and you’ll be invited to answer product’s question by email, which will also earn you a "Helpful Badge"! You can cancel any time on the privacy settings page.

  • Subscribe