All Messages

Q: Hi! Are you going to renew stock?

Asked by BG342215237 on 2023-02-26 07:29:05

BG243353816 You will not get an answer from the company here, but they will most likely renew their stock some time soon.

2023-03-02 10:35:05 Helpful (0)
Submit
Answers (1)

Q: Will this controller work with emax tinyhawk 2 freestyle?

Asked by BG435655348 on 2023-03-01 04:04:29

BG243353816 For sure. Just make sure to bind it properly with the receiver.

2023-03-02 10:33:42 Helpful (0)
Submit
Answers (1)

Q: weight?

Asked by charles.solomon on 2020-01-19 07:04:34

BG243353816 2.7 grams per antenna

2022-11-21 06:16:24 Helpful (0)
Submit
Answers (1)

lacvo If I am not mistaken, the purple wire is for voltage reading from your FC to have it displayed on the camera video output so you can monitor the voltage of your flight battery. You need to solder that pin the terminal of your power supply

2022-10-04 01:46:12 Helpful (1)
Submit
Answers (2)

BG243353816 This will not work with a dji mavic mini. It’s purpose is to be used with an analog fpv drone.

2022-09-24 08:04:53 Helpful (0)
Submit
Answers (3)

blakey17 It's for the camera control so you can see the OSD and change settings from the goggles using the OSD I'm sure you can find some more specific information on YT but yes basically you don't need it to fly

2022-08-07 06:37:53 Helpful (1)
Submit
Answers (1)

Q: what size stack does it hold

Asked by BG191941552 on 2022-07-29 01:45:25

BG243353816 30X30.I used this one and it fits perfectly: MAMBASYS F405 MK2 Betaflight Flight Controller F40 40A 3-6S DSHOT600 FPV Racing Brushless ESC 30.5x30.5mm

2022-07-29 10:48:45 Helpful (0)
Submit
Answers (1)

BG243353816 For it to work on your drone you only need 2 18650 batteries. U don’t need anything else

2022-07-13 12:54:22 Helpful (0)
Submit
Answers (2)

BG243353816 You should probably just wait. If it’s been a week or 2 after the expected shipping date you could contact them by going on the order details and then press the contact us button and they should be able to help you.

2022-07-08 02:22:40 Helpful (0)
Submit
Answers (1)

Q: can I use 5.1 inch props?

Asked by Daniele Pintore on 2022-06-29 06:19:26

BG243353816 Yes it should be fine as it shows on the website: Support Max. 5.1 Inch Propeller. Hope this helps!

2022-06-29 11:30:03 Helpful (1)
Submit
Answers (1)

life1sgood Thisis a remote control so the VTX only has to do with your goggles or screen. If you are using ELRS or CRSFR you will need to purchase the corresponding module and install and bind the corresponding receiver.

2022-06-22 03:58:50 Helpful (1)
Submit
Answers (1)