stoep
My Contents
All Messages
Reviews
Comments
Answers
Questions

All Messages

5V 0-1.2 MPa Pressure Transducer Sensor Oil Fuel Diesel Gas Water Air Sensor
US$15.99 US$19.99

Q: Is this an absolute pressure transducer? I mean, O psi means no pressure at all but not atmospheric pressure, right?

Asked by BG131240121 on 2021-04-27 05:22:30

stoep It's a pressure sensor not a vacuum sensor. 0 means atmospheric pressure.

2021-04-27 06:26:35 Helpful (0)
Submit
Answers (1)
stoep 11/04/2021
Mediocre performance due to lack of filtering. For the price it's reasonably good but don't expect big performance. Worth the money? Yes
Geekcreit® Spectrum Analyzer USB LTDZ 35-4400M Signal Source with Tracking Source Module RF Frequency Domain Analysis Tool With Aluminum Shell
US$68.99 US$67.99
0
Recommendations
Comments (0)
stoep 29/01/2020
Item is not as advertised. Doesn't have XHP70 LED's. It's an okay flashlight but value for price isn't good. I own several flashlaghts of less than 10 dollar that outperform this one.
XANES P70 T3U XHP70 LED 5Modes USB Rechargeable Waterproof LED Flashlight 18650 Flashlight 26650 Flashlight
US$22.68 US$30.00
11
Recommendations
Comments (5)
stoep 23/02/2019
The image quality is great. Screen brightness is great. Touch screen is good. Processing is fast. Nextion editor is okay but far from good: -No subroutines -No string manipulation -Very poor interface to manage bitmaps -Not so good font creation quality, no anti aliasing option -Variable naming and usage is -so-so -No calculations possible in if / while -Serial upload of 16megabyte takes forever: use a micro SD card! -Arduino library is bloated and doesn't work with softserial. Hint: make display control your communication protocol timing (I use 50ms and 57k6 serial speed) and then you can work with softserial. Controlling nextion variables yourself isn't hard. Some issues that can all be worked around but take time. Still, a good quality product. Attached are images of two hobby projects I made with this screen. I made anti-aliased bitmaps for everything....
Nextion NX4827T043 4.3 Inch HMI Intelligent Smart USART UART Serial Touch TFT LCD Screen Module Display Panel For Raspberry Pi 2 A+ B+ Kits
US$78.21 US$93.64
2
Recommendations
Comments (1)
HP DC 12V 460W 38A Power Supply with XT60U-F Plug for ISDT Q6 SKYRC B6 NANO Battery Charger
US$32.19 US$38.99

Q: Can this use for suply amplifier 12v?

Asked by BG124364738 on 2020-12-05 10:54:37

stoep Yes, absolutely. Besides using it to charge LiPo's, I also use it for my powered sub, and that works perfectly.

2020-12-06 02:24:40 Helpful (0)
Submit
Answers (3)
stoep 12/10/2020
Nice product. Varies a bit from changes in barometric pressure, but very useful sensor. Was shipped very quickly.
FlySky FS-CAT01 Altitude Sensor I.bus Data Port Compatible FS-i8 FS-i10 Transmitter
US$17.24 US$17.99
0
Recommendations
Comments (0)
stoep 12/10/2020
Have not tried the temp sensor in my airplane yet, but the senor works, shipping was fast. Nice work BG!
Flysky FS-CTM01 Temperature Collection Module For iA6B iA10
US$14.17 US$21.99
0
Recommendations
Comments (0)
stoep 12/10/2020
Amazing. I thought the fan would be loud, but it's actually OFF most of the time (under light loads). Good server power supply repurpose!
HP DC 12V 460W 38A Power Supply with XT60U-F Plug for ISDT Q6 SKYRC B6 NANO Battery Charger
US$32.19 US$38.99
0
Recommendations
Comments (0)
stoep 14/08/2020
these little units are a must-have to monitor your LiPo in flight. Excellent!
Flysky FS-CVT01 Voltage Collection Module For iA6B iA10 Receiver
US$17.24 US$18.99
0
Recommendations
Comments (0)
stoep 14/08/2020
I had a number of 6 channel rx-es already, and now needed an extra channel. BG is cheap and has GREAT products. This is another one of them.
Flysky 2.4G 10CH FS-iA10B Receiver PPM Output With iBus Port
US$15.99 US$32.99
0
Recommendations
Comments (0)
stoep 14/08/2020
A tad too much delay to my liking, not a big issue. Great value for money.
5-6V Steel Ring Gear Servo Slow Reducer Delay Module for RC Models
US$9.19 US$9.59
0
Recommendations
Comments (0)
stoep 04/04/2020
This motor/esc combination was bought to replace a low end brushed 15T 540 size engine, for my Tamiya TA-01 Nissan Skyline GTR Nismo. This motor isn't any faster than the 15T brushed, but the efficiency is MUCH higher, and this ESC is a beauty. Braking is easy, acceleration control is just perfect and low speed regulation is also very very nice. The old brushed motor ran very hot, and this engine runs very cool. I just now did order the 4379kV motor, as I do want a bit more speed. This motor and ESC will find their way into my Tamiya M03 Mini. Very happy with this purchase. Fast shipping, good packaging, high quality. If the motor holds up for a long time, I don't know....
Surpass Hobby Waterproof F540 V2 3650 Sensorless Brushless Motor with 60A ESC for 1/8 1/10 1/12 1/14 RC Brushless Cars Tamiya TT-02
US$42.99 US$45.99
1
Recommendations
Comments (0)
stoep 12/04/2020
This battery has me TRULY AMAZED. The LiPo inside the hard case is rattling about a little bit, and this did not inspire a lot of confidence. So, I decided to DISCHARGE and then CHARGE the battery to find out it's mAh rating. I have a battery charger that I've found to be reasonably accurate in reporting charge mAh's, so I gave it a shot. During discharge I was already surprised to see more than the rated 3200mAh.... So, I set my charge rate to 3.3A and a time limit of 80 minutes on the charger. At the end, when the time limit hit, both seperate lipo cells were at 4.19 / 4.20 V, alternating, and the charge current had dropped to 500mA. Here is the mAh I was able to charge:
ZOP Power 7.4V 3200mAh 45C 2S Lipo Battery T Plug for RC Car
US$26.44 US$33.99
0
Recommendations
Comments (0)
stoep 04/04/2020
Works as intended, very easy operation.
Racerstar LED Program Card For Racerstar Surpass Rocket ESC
US$10.14 US$15.99
0
Recommendations
Comments (0)
stoep 10/01/2020
These cars are great fun. The design of the "chassis" is brilliant with a flexing point and a spring. Very nice. Steering is not proportional just straight forward, or left, or right. Steering can be finetuned at the underside, (left right) so it will go straight. The speed control is proportional and works great. It outperforms my vacuum cleaner in picking up hairs (under sofa's) from the floor, so frequent hair removal from all 4 axles is needed :) Great fun, good cars, I like them!
Banggood 1/32 2.4G Racing Multilayer in Parallel Operate USB Charging Edition Formula RC Car Indoor Toys
US$18.10 US$21.99
0
Recommendations
Comments (0)
stoep 21/02/2019
Nice product at a good price. Needs some oiling but works fine.
Three Jaw Lathe Chuck M12*1 45mm Chuck for Mini 6 in 1 Lathe
US$28.97 US$44.99
0
Recommendations
Comments (0)
stoep 11/10/2018
The unit is exactly as advertised, and it works extremely well. Needs 3 x AAA battery, doesn't run on LiPo voltage (too low) but that is just a minor issue. Also no way to store an image (no SD card) but also minor issue. Again, as advertised, and I'm really thrilled to have a thermal camera at this pricepoint.
HT-175 Infrared Thermal Imaging Camera Digital Thermal Imager -20~300℃
US$136.99 US$191.99
2
Recommendations
Comments (1)
stoep 03/10/2018
Today the kit arrived. The box it is in is a simple one, but effective. It made me wonder about the quality of the ratchet crimping tool itself. To my surprise this is a high quality product and feels very solid. Owning a tool from AMP (to crimp BNC connectors) I do know what A-brand product feels like. This isn't far behind. I really like it. Also like all the different inserts it comes with. I immediately crimped a few connectors and yes it's really good. Recommended!
Paron® JX-D5 Multifunctional Ratchet Crimping Tool Wire Strippers Terminals Pliers Kit
US$36.99 US$44.99
0
Recommendations
Comments (0)
stoep 28/05/2018
Even though the text clearly says it ships with a US power cord, the image shows a European power cord. So that gives a wrong impression. A lot of people don't read. I saw it and for me it's no issue as I have many suitable power cords. But do please change the image. Then the charger itself. It boasts a CE marking but close inspection revealed insufficient distance between AC and 'user touchable' DC side. There is a slot in the board, which is perfect, but it ends too soon, leaving a 2mm distance between solder joints on primary AC side and user touchable DC side. No way it passes CE requirements. The electronic design itself looks okay at first glance. It even has a fuse. So I am not too worried regarding 'fire hazard' situations. Value for price and quality are so-so as far as I am concerned. I don't want to zap myself, please! It seems the board does have sufficient room so a slight reallocation of the switcher controller would already help mitigate the issue. I will use the charger, but only on 12VDC.
LiitoKala Sii-260 I2 Smart 18650 26650 Battery Charger for Li-ion/Ni-MH/Ni-CD Battery
US$13.14 US$17.99
3
Recommendations
Comments (0)

You are the expert,can you help?

We sincerely invite you to subscribe to the Invite Answer email!

If you subscribe, we will invite you via email to answer questions people have about products. By subscribing you]ll also earn the "Helpful Badge"! You can unsubscribe at any time on the privacy settings page.

Help others and be happier!

  • Subscribe

About Badges

Badges are related to the community, and users earn badges by creating quality content, completing missions, or by participating in special activities.Specific people will also have their own exclusive badge.
CEO Badge

The CEO Badge is owned only by the boss of Banggood.

Badges you can earn are coming soon
  • OK

About Badges

Badges are related to the community, and users earn badges by creating quality content, completing missions, or by participating in special activities.

Helpful Badges

The Badge is awarded to users who are subscribed to the Invite Answer email and signifies their gratitude to help others. The badge appearance upgrades as the user helps more people.
  • OK

Thank you for subscribing! You have also earned a badge!

  • View It

Thank you! Your answer will help ###name### and ###num### other people!

Check awaiting answers to see more people who need help.

  • OK

Thank you! Your answer will help ###name### and ###num### other people!

Subscribe to "Invite Answer"emails and help others with product questions will earn you "Helpful Badge"!

  • Subscribe

Are you ready to help?

We invite you to subscribe to our Invite Answer email!

Subscribe and you’ll be invited to answer product’s question by email, which will also earn you a "Helpful Badge"! You can cancel any time on the privacy settings page.

  • Subscribe