Hobbyboy
Q: Need spare motor Screws and Hatch?
Asked by KiwiBoater on 2024-04-27 09:00:22
Hobbyboy Banggood does have a parts section, where you can find these pieces you require. It's labeled as Airplane parts.
2024-08-22 12:11:33 Helpful (0)Q: Is it an analog or digital servo??? Thank you
Asked by FAUSTO CAREGNATO on 2024-06-14 11:53:39
Hobbyboy Digital, and it's a good servo at 5grams. I use them all the time.
2024-08-22 12:10:19 Helpful (0)Q: what is the difference in between the model A or B
Asked by JohnnyDRC on 2024-02-20 01:55:22
Hobbyboy one is a kit, which you would need to supply all the electronics. Motor, esc, servos, and fpv system. This would be labeled as a kit. The other option is the PnP, which stands for plug and play. This has the motor,esc, servos already mounted possibly. you would need to add in the fpv system and a reciever of your choice.
2024-08-22 12:09:39 Helpful (0)
Q: Will pontoon floats be available?
Asked by NorthbySouth on 2024-03-10 12:09:59
Hobbyboy it would need to be modified to except floats. I was wondering the samething. UMX floats may work, but you would need the rear mount or fab something.
2024-07-25 03:34:49 Helpful (0)Q: Are these longer than the k989 drive shafts?
Asked by WillyDooit on 2023-08-08 09:42:09
Hobbyboy I'm having the same issue. You'll need a 27mm cvd axle
2024-07-17 06:56:18 Helpful (0)
Hobbyboy This rc car is very well built and fast. So I wanted it to go faster and decided to upgrade everything. I bought all the upgrade parts this beast would need, except the motor/gearbox mount. I bought an NHX motor/esc combo at a great price. I started the upgrade and realized the motor mount would not allow the spur gear to easily slide back through the opening. You will have to destroy it! It's a hard plastic or something, but it doesn't flex enough to allow the motor to be removed. It doesn't allow for a pinion puller to be used either. I had to use a flat head screw driver and mangle the mount, trying to get it to stretch. So if you want to purchase this, go ahead. Just remember when the motor dies it can't be easily replaced. Also if you do the upgrades get the longer CVD shafts. They are upgraded to fit the newer differential in the gearboxes. The stock ones are to small. The upgraded parts have bolts and the are different size hex heads. So you will need small and smaller Allenwrenches to use the new hardware or just use the stock ones. Hope this helps some one looking for a sweet little headache.
Hobbyboy use the same bearings that came with the stock differentail
2024-07-13 11:44:05 Helpful (1)
We sincerely invite you to subscribe to the Invite Answer email!
If you subscribe, we will invite you via email to answer questions people have about products. By subscribing you]ll also earn the "Helpful Badge"! You can unsubscribe at any time on the privacy settings page.
Help others and be happier!
Thank you for subscribing! You have also earned a badge!
Thank you! Your answer will help ###name### and ###num### other people!
Check awaiting answers to see more people who need help.
Thank you! Your answer will help ###name### and ###num### other people!
Subscribe to "Invite Answer"emails and help others with product questions will earn you "Helpful Badge"!
We invite you to subscribe to our Invite Answer email!
Subscribe and you’ll be invited to answer product’s question by email, which will also earn you a "Helpful Badge"! You can cancel any time on the privacy settings page.
