A part of the review has been auto-translated.
Good for an amateur usage. Temperatures are off by 8-15C depending the range. The lower the temperature the larger inaccuracy in what we see on the display and how hot it really is. Over 250C the margin of error decreases.
ok, tamanho ideal para incluir bomba de ar e resistência de aquecimento... funcionamento capaz, com regulação de temperatura, facilidade de aumentar/diminuir a pressão do ar e botão de liga/desliga muito prático. Recomendo.
probably the best you can buy for the price, need some smaller nozzles
Доставил курьер до порога, за 2 недели. Приблуда рабочая, упаковка тоже норм. Но эта лабудень довольно большая. Работает прикольно, если разогрет до 450 и выключить, то нагрев прекращается а вентилятор не выключится пока температура не достигнет 100 С. Своего рода защита, что тоже хорошо.
It’s sometimes that I need a tool to just make my job! I don’t need “a team of gigantic black boxes” with hoses extra tubes, cables, cords and ‘’flying staffs” to only unsoldering a resistor or an SMD Fuse! Finally I found that Tool! It’s compact and lightweight, have very nice airflow and fast response in temperature adjustment. I manage to reballing reflux BGA IC on Laptops MoBo and works just fine! You need to buy some extra nozzles, the nozzles that come with the tool is quite big for reballing! GREAT Product it’s worth the money! I Totally Recommended. Seller’s service was VERY GOOD!!! Delivery Time its fast.
Good product, properties are in accordance with the description on the page. Difference in specification - the version "upgrade" has an output power of 700W. For the goods supplied, two screws in the motor housing have a thread taken off from production, holding firmly only one screw.
Good quality I highly recommend ;) 480C The power is 700W not 650W as in the description.
I bought 4 of these. Every one is working well and everyone is satisfied with it. Very strongly recommended.
Works great. Easy-to-use. The digital temperature control is a clear and straight forward. Also a great safety feature after use and power off it cools down to 100'C. Only thing a smaller nozzle would be even better.
got the product but didn't test it, felt the manual was a little low on parameters.