At Banggood, we uses cookies and other similar technologies to provide you with essential functionalities and for aggregated statistics.
We also use optional cookies for a better experience with:
You can choose not to allow some types of cookies via"Cookie Settings".If you want to learn more about it, you can swipe to the bottom of the page to see the Privacy Policy
When you visit any website, it may store or retrieve information on your browser, mostly in the form of cookies. This information might be about you, your preferences or your device and is mostly used to make the site work as you expect it to. The information does not usually directly identify you, but it can give you a more personalized web experience.
Because we respect your right to privacy, you can choose not to allow some types of cookies. However, blocking some types of cookies may impact your experience of the site and the services we are able to offer.
{{$productInfo.reviewAmount.average}} out of 5
AT9S Pro Transmitter | |
Weight: | 880g |
Size: | 183*100*193 mm |
Frequencies Band: | 2.4Ghz ISM band (2400MHz-2483.5MHz) |
Bandwidth: | 5.0MHz |
ACPR: | >38dbm |
Modulation Mode: | QPSK |
Spread Spectrum Mode: | DSSS&FHSS/CRSF |
Transmission Power: |
DSSS&FHSS<100mW (20dbm) CRSF 10mW/25mW/100mW/500mW/1W/2W (Optional) |
Operating Voltage: | 7.4~18.0V |
Operating Current: |
DSSS&FHSS<90mA@12V CRSF Depends on the transmission power selected |
Channel Qty: | 10/12 (CH5 through CH10/12CH can be programmed) |
Control range: |
DSSS&FHSS-4KM in the air (Maximum range is tested in an unobstructed area free of interference) CRSF-Depends on the RX and TX from BLACKSHEEP |
Signal Output: | PWM/SBUS/PPM/CRSF |
Compatible receivers: |
12CH-R12DSM, R12DS 10CH-R9DS (Std), R6DS, R6DSM CRSF: RX from BLACKSHEEP |
Simulator Mode: | the transmitters RF circuit turns off to save battery power |
Display: | 2.8-inch 16-bit true color screen, resolution 240 * 320 pixels |
Adaptable Models: | Rotary Wing, Fixed wing, Multicopter, Car, Boat, Robot |
Overview: | Radiolink R12DSM, 2.4G 12 channels receiver, DSSS and FHSS hybrid dual spread spectrum, 2.5 gram weight, SBUS and PPM signal support, use for Radiolink transmitters AT9, AT9S, AT10 and AT10II, is the best choice for racing drone. |
SBUS and PWM signal change: | Short press the ID SET switch twice within 1 second, the signal is changed from SBUS to PPM. The red LED indicates the PPM and blue/purple indicates SBUS. |
Two signal working mode: |
Blue/purple LED, SBUS signal , 12 channels totally.
Red LED always, PPM signal, 12 channels totally.
|
How to match code with transmitter: |
1. Place the transmitter and the receiver close to each other within 1 meters.
2. Turn on the transmitter, then power on the R12DSM.
3. There is a black button on the R12DSM, press the binding button for one second until the receiver light starts blinking and release, after about 8 times blinking, match code success when receiver signal LED always on.
|
Shipping method(s) | Shipping time | Tracking information |
---|