HGLRC XJB F440 Omnibus F4 Flight Controller OSD BEC & 40A Blheli_32 3-4S ESC DSHOT1200 for RC Drone
A part of the review has been auto-translated.
I've put this tower in my 80mm 2 inch build and works as it should. First attempt failed because I haven't soft mounted fc enough and motors are producing much noise. After properly I soft mounted it I have no problems with yaw twitch any more.
Comes as always in a nice box with cap, some fasteners and o-rings.
wird bald verbaut
funziona bene e valido apparte osd che ha dei problemi Ma elettronica e ottima
funziona bene apparte osd che il sensore non esiste e quindi non si possono avere mah consumati
Easy to solder, works well, no brainer for me. The pin connector between the boards saves cables, wich is good for tight builds. It can break of at bigger crashes, a few of my friends had to replace them because of that...
Nothing can make your 3" fly better than this FC. This is the version 2.0 of the HGLRC 20mm FC with the 4x40A 32bits 4in1 ESC. Don't be fooled by the size, it can easily be used for a 5" drone ! Because of high amp, you should use a XT60 connector instead of a XT30 one. The only black point is no current sensor. 32 bits ESC telemetry give you only RPM wich is completly useless when flying. FC and ESC are compatible with F425 / F428 and all the HGLRC 20mm lineup.
This one with 1806 high kV motor and ultralight frame made my best flying quadcopter. 6mins up to 10mins flighttimes with GoPro on a 850mAh 4S pack - incredible. Downside: I broke the flightcontrol along with Foxeer Predator cam and expensive frame - guess that happens when you really push your limits. Plus: besides the low weight, high performance, clean build etc. HGLRC parts seem to hold up okay - my FC died, but VTX and 4in1 ESC survived the crash :) The fast psses in the beginning are 80% and 75% throttle: https://www.youtube.com/watch?v=pK0BVMpFA24
Received with long metal screws and 1000mah 25v Low ESR Capacitor :)
good stack