Customer Reviews

4.89 out of 5
See all 184 reviews
Write a Review
  • All Reviews (184)
  • Image (27)
  • Video (1)
  • All Star
    • All Star(184)
    • 5 Star(167)
    • 4 Star(14)
    • 3 Star(2)
    • 2 Star(1)
    • 1 Star(0)
Sort by:
Top Review
  • Top Review
  • Most Helpful
  • Most Recent
Reviews only from your country (United States)
Show Original

A part of the review has been auto-translated.

  • 23/03/2021

    Great ESR Inductance, Resistor, Cap and more Meter, a must have to test if the caps are ok, and MUCH more, it is VERY accurate, tested the ohms with a Elenco RS-500 and a calibrated Fluke 179 True-RMS Digital Multimeter, and the BSIDE ESR02PRO is also calibrated great, it graves almost all the same numbers as my Fluke 179. I would recommend everyone this ESR Inductance, Resistor, Cap and more Meter, but be careful with the Plug-in device test seat, they can only be used with caps with normal small pins, use the external pen holder holes for the big caps and more. I put a BSIDE ESR02PRO Typical ESR Value Of Electronic Capacitor unit paper with the photo's, so that you don't have to turn the BSIDE ESR02PRO around all the time to see what ohms the caps must be your testing.

    Show Original
  • 04/09/2021

    I used to buy, assemble and use a kit with a case. This time, I had to measure the SMD part, so I bought it. The measurement buttons on the left and right are useful for measuring while holding down the SMD part. There is also a capacitor discharge circuit that was not available in the previous kit, which makes it convenient for measuring electrolytic capacitors. I'm happy with my purchase.

    Show Original
  • 13/02/2021

    The operation in inductor measurement is random sometimes marks as if it were a resistance or capacitor is not precise, otherwise if it works well , the measuring plates are very thin and do not make good contact with the electronic component to be measured. works with 12 volt 1 amp adapter.

    Show Original
  • 02/09/2021

    Works ... sort of ... De-soldered capacitors give readings that can be out by 40%. The resistors and diodes seem to be accurate. Trying to test in circuit is a bit of a crap shoot. Inductance is also a bit iffy and the resolution is 10uH with the minimum value being 10uH. I expected a bit more reliability. Would like a bit more control over what its trying to measure.

    Show Original
  • 22/10/2021

    A small tool but it has powerful kungfu to fight again electric devices. Thanks Bangood. Recommend for buying. But selling without probes.

    Show Original
  • 27/07/2021

    Great device. Afraid of non - discharged capacitors.

    Show Original
  • 11/03/2021

    Very useful. A little fast to shut off, otherwise easy to use.

    Show Original
  • 02/02/2021

    Excellent works very well. It has perfectly recognized diodes, transistors, leds, resistors, capacitors, inductors.

    Show Original
  • 07/07/2021

    Very good product. I recommend it. Thank you very much.

    Show Original
  • 18/10/2019

    Ottimo misuratore di componenti elettronici, utilissima la possibilità di misurare componenti SMD oltre agli SMT. Strumento ben realizzato, con plastiche di buona qualità e rifinite. Questo strumento possiede inoltre la possibilità di connettere puntali tramite connettori a banana per misurazioni a distanza dallo strumento senza utilizzare le feritoie/pads di contatto sullo stesso. Schermo retroilluminato con luce bianca. Strumento sicuramente consigliato.

    Show Original

    Total 0 pages

    Go to page


    You might be interested in

    recommendation for you
    • US$16.99
    • US$20.99
    • US$33.99
    • US$6.99
    • US$59.99
    • US$5.99
    • US$33.99
    • US$169.99
    • US$8.99
    • US$2.99
    • US$23.99
    • US$52.99
    • US$31.99
    • US$15.99
    • US$22.99
    • US$91.99
    • US$21.99
    • US$12.99