Native resolution is 1024x600. No 1080p!! Contrast is OK, viewing angle very good. Work with Raspberry Pi with following entries in config.txt: hdmi_force_hotplug=1 hdmi_group=2 hdmi_mode=1 hdmi_mode=87 hdmi_cvt=1024 600 60 3 0 0 0

Native resolution is 1024x600. No 1080p!! Contrast is OK, viewing angle very good. Work with Raspberry Pi with following entries in config.txt: hdmi_force_hotplug=1 hdmi_group=2 hdmi_mode=1 hdmi_mode=87 hdmi_cvt=1024 600 60 3 0 0 0

Native resolution is 1024x600. No 1080p!! Contrast is OK, viewing angle very good. Work with Raspberry Pi with following entries in config.txt: hdmi_force_hotplug=1 hdmi_group=2 hdmi_mode=1 hdmi_mode=87 hdmi_cvt=1024 600 60 3 0 0 0

I tried to power it on but there is no indication from the led. I found out that it is not soldered properly and after fixing its okay. I noticed that IC is getting heated fast so I might add a heatsink and a fan to compensate the heat.

I tried to power it on but there is no indication from the led. I found out that it is not soldered properly and after fixing its okay. I noticed that IC is getting heated fast so I might add a heatsink and a fan to compensate the heat.

I tried to power it on but there is no indication from the led. I found out that it is not soldered properly and after fixing its okay. I noticed that IC is getting heated fast so I might add a heatsink and a fan to compensate the heat.