Wayne62
Wayne62 () indicate reference to part number. of the 4 side, each measures 7mm (07) tool nose radius R0.2mm (02) the hight or thickness is 2.5mm and point to point is 12.5mm in length. hope this helps.
2022-09-07 02:42:51 Helpful (0)
Wayne62 after some trial and error... the button to the left of the screen is screen on and off with a single click, when screen is flashing its down-decrease the displayed voltage value. the button to the right with a single click will illuminate an LED indicating input(positioned on the left) or output (positioned on the right) voltage with the display showing that corresponding value. long press of the right switch will enter data input mode. single click of the right button to display the value you wish to adjust, long press and the screen will flash indicating data input mode. Using your multi meter, check the input voltage and adjust the displayed input voltage to what you read on your multi meter. switch to view the output voltage, use your multimeter again but on the output terminal, with a small flat screw driver adjust the multi turn potentiometer to correspond with the value displayed on your multi meter. then only with single clicks of the left-down and right-up buttons, correct the displayed voltage on your module. Don't Long press the right button unless you wish to exit the data input mode. and long press of the left will switch off the display. might take a few adjustments to equalize the module display with the multi meter reading on the output. hope this helps.
2022-09-07 02:33:17 Helpful (0)Q: how can we check butane level..
Asked by Aadi on 2021-10-11 04:51:19
Wayne62 when the flame goes out, there is
2021-12-06 05:29:37 Helpful (0)
Wayne62 mine works on win10
2021-11-28 10:02:39 Helpful (0)
We sincerely invite you to subscribe to the Invite Answer email!
If you subscribe, we will invite you via email to answer questions people have about products. By subscribing you]ll also earn the "Helpful Badge"! You can unsubscribe at any time on the privacy settings page.
Help others and be happier!
Thank you for subscribing! You have also earned a badge!
Thank you! Your answer will help ###name### and ###num### other people!
Check awaiting answers to see more people who need help.
Thank you! Your answer will help ###name### and ###num### other people!
Subscribe to "Invite Answer"emails and help others with product questions will earn you "Helpful Badge"!
We invite you to subscribe to our Invite Answer email!
Subscribe and you’ll be invited to answer product’s question by email, which will also earn you a "Helpful Badge"! You can cancel any time on the privacy settings page.
