Michael
Q: What is the difference between A and B
Asked by Michael on 2020-10-13 03:25:10
BG331041149 Does he work in a car?
2021-01-01 12:43:37 Helpful (0)Q: How close does the laser have to be to the surface for optimum results ?
Asked by Michael on 2020-11-21 12:56:09
pattarom Laser have a fixed focus, so you must keep 2 millimeters from surface. Into the package is provided a piece of black acrylic (about 5 by 9 centimeters) that you can use al shim. To properly setup the laser: - Release the two screws that fix the laser sled, raise completely the laser.and re-fix screws - Place the object you want to engrave-cut under the laser - Place the black acrylic jig over the object - Release the laser sled screws and lower the laser until it touch the jig. - Fix the screws and remove the black acrylic jig. Now you che start the job. If the object to be engraved is very thin, instruction recommend, to avoid vibrations, to raise it placing another taller object under it, so the laser is less protruding from the carriage. Let me know if you need more explanations.
2020-11-21 03:16:13 Helpful (1)
We sincerely invite you to subscribe to the Invite Answer email!
If you subscribe, we will invite you via email to answer questions people have about products. By subscribing you]ll also earn the "Helpful Badge"! You can unsubscribe at any time on the privacy settings page.
Help others and be happier!
Thank you for subscribing! You have also earned a badge!
Thank you! Your answer will help ###name### and ###num### other people!
Check awaiting answers to see more people who need help.
Thank you! Your answer will help ###name### and ###num### other people!
Subscribe to "Invite Answer"emails and help others with product questions will earn you "Helpful Badge"!
We invite you to subscribe to our Invite Answer email!
Subscribe and you’ll be invited to answer product’s question by email, which will also earn you a "Helpful Badge"! You can cancel any time on the privacy settings page.
.jpg)
