All Messages

donaldsneffe 07/08/2021
Very high quality full metal chassis. Does come with all gears, including 11 t metal pinion. Does come with nice beadlock rims, but no tires. Nice metal shocks, not oil filled. There is not any peace of plastic in the whole chassis, only some rubber o-rings for dampening links and a plastic disc inside each shock. Shocks are nice, but springs are way too hard. They are much harder than the hardest springs of SCX24 upgrade shocks wihich come with springs of several hardness type for tuning. Springs have to be changed if you wanna good dampening. This metal chassis is more or less an exact copy of a SCX24 Chevy chassis, including central transmission. Same wheelbase as Chevy and Betty, links "Chevy style", nice and metal, not high clearance. Good quality metal driveshafts. Unfortunately they simply copied the SCX24 and did not include "upgrades" what nearly all SCX24 owners make for tuning. Servo mount is too small for upgrade servos, and even too narrow for the most popular Emax upgrade servo. Motor mount plate does only come with 2 holes for screws, so it is not possible to mount a Barrage motor, you will have to drill holes or buy an upgrade plate with 4 holes. Also battery mount has the same stands, you will have to cut the right front stand to mount a Barrage motor. Battery mount is made out of metal, heavy and high up. Unfortunately they did not change this, no LCG battery mount, no "Barrage" mount possible without mods. If you wanna mount a Komodo or Surpass outrunner you will have to cut the electronics mount plate, which is necessary to keep the front shock mounts firmly in place. This chassis is "ready to go", you will need electronics, tires and a body, it is made for the SCX24 chevy body. Watch my review video in the video section.
7
Recommendations
Comments (0)
donaldsneffe 13/12/2019
This is not a "normal" winch-controller. Important parts are missing in the description - and of course it does not come with a manual. Comes really nicely packed in a plastic box, does have a PH2.0 plug ("mCPx") for plugging in a winch or motor. I needed quite a lot of time to work out how this winch controller works. It does not work as a "normal" speedcontroller works. You will plug the winch controller directly to the receiver. But you cannot go forwards, backwards (and change speed), if you plug it to channel 2 (ESC channel) Every time, the winch controller gets a signal from the receiver/transmitter, it changes the direction of the motor/winch turn and runs slowly. Next "signal" is stop. Next signal is "run other direction". This has some advantages and some disadvantages, but I think, Banggood or RBR/C should tell us with a manual, how this winch controller works! It means: You can use this winch controller with a simple push button on your transmitter, as many transmitters do have (on the handle) and most people use for switching on/off lights. No 3-position switch is needed to control this winch controller, a push button does the job! This is a big advantage for people using a simple 3-channel transmitter with ch-3 controlled by a push button. They can control a winch now using this controller! But if you have a tx with 3-position switch, you cannot use this winch controller as you were used to with "normal ESCs" - pushing the switch to one direction - winch will go to this direction, center is stop, pushing to the other direction, winch will go to the other direction. This winch controller will work with such a switch, but it will change motor direction every time you push it, no matter, in which direction. So it is always - direction 1 - stop - direction 2 - stop - direction 1 - stop - direction 2 - stop... and so on. Nice: powerd by receiver. Check out BG 1533777 for a rx powered ESC which works perfectly as winch controller.
7
Recommendations
Comments (0)

Q: How do you make case work?

Asked by BG141125415 on 2021-09-06 09:59:30

donaldsneffe Openit and insert the smartphone

2021-10-10 05:50:36 Helpful (0)
Submit
Answers (0)