Precise details:
 Description:
Brand: XXD
Item Name: Power System Combo
SG90 9G servo Specification:
Weight: 9g
Dimension: 23×12.2x29mm
Stall torque: 1.8kg/cm(4.8v)
Gear type: POM gear set
Operating speed: 0.12 sec/60degree(4.8v)
Operating voltage: 4.8v
Temperature range: 0℃_ 55℃
Dead band width: 1us
Power Supply: Through External Adapter
servo wire length: 25 cm
Servo Plug: JR (Fits for Futaba and JR)
2217 Motor Specifications:
Dimension: 27.8*32 mm
Weight: 68 g
Shaft Diameter: 4 mm
Accessories: 4.0mm prop adapter, motor mount, screws
Prop Recommendation:
2217-1100KV: 11 or 10 inch props, eg. 1155, 1070, 1060, etc.
2217-1250KV: 9 inch props, eg. 9050, 9045, 9060, etc.
2217-2300KV: 6 inch props, eg. 6040, etc.
40A ESC Specification:
Continuous Output Current: 30A
Short-term Output Current: 40A (not less than 10 seconds);
Power Input: 6V - 12V (2-3 lithium battery packs or 5-10 nickel-metal hydride/nickel-cadmium battery packs);
BEC Output: 2A/5A;
Size: 26mm*46mm*10mm
Weight: 28g
Features:
- Multi-layer PCB supplies power to MCU separately to improve motor stability and durability
- Low battery protection function
- Overheat protection function, anti-damage ESC
- Throttle failure protection
- Smooth and accurate speed control, automatic positive and negative control, no need to change the connection order of the motor and the ESC
Start the Program Normally:
1. Turn the accelerator switch to the end, then turn on the engine switch
2. Connect the battery to the ESC, and make a special sound: "Di DA --Di DA", indicating that the power supply is OK
3. After the self-test is over, a long "BEEEEEP" sound will be issued, indicating that it is normal. If it is not adjusted properly, an alarm sound will be issued
4. After several "beep--" sounds, it indicates the parameter status of other programs
5. Move the throttle stick to start flying
Throttle Setting:
1. Turn on the transmitter, move the throttle stick to the top
2. Connect the battery to the ESC and wait for 2 seconds
3. "BEEP-BEEP" sounds, indicating that the setting of the highest point of the throttle is confirmed
4. Move the throttle stick to the bottom, wait for about 1 second
5. "BEEP" sounds, indicating that the setting of the lowest point of the throttle is confirmed
6. The ESC starts beeping, ready to fly
Note:
1. Due to the light and screen difference, the item's color may be slightly different from the pictures.
2. Please allow 0.5-2 cm differences due to manual measurement.
Package Included:
1x XXD A2217 KV1100 Brushless Motor
1x 40A ESC
2x 9G SG90 servo
2x 1060 propeller