Precise details:
Specification:Brand | Xanes |
Product Name | Bike HeadLamp |
Material | ABS |
Charging method | USB charging |
Power | 50W |
Battery Capacity | 3500mAh |
Luminous flux | 500Lm |
Color | Black |
Weight | 97g |
Features:
Power display at a glance, real-time power monitoring, always know the power situation
USB interface charging, built-in rechargeable lithium battery, support a variety of USB devices, a variety of charging modes, open up the range of applications.
One key switch at will, strong light / medium light / flashing at will switch.
COB soft light beads, soft lighting a wide range of non-blinding.
Wide band soft light headlamp, mini light-weight soft light headlamp.
Night actual brightness display, according to the environment to adjust the appropriate light mode and the size of the light range, so you are no longer constrained, as you wish to adjust.
Instructions for use:
The battery is positive facing inward (head side), negative facing outward (tail).
The switch is on the tail, the switch function Chengan switch is the switch function, light press the switch is the dimming function.
The headlamp adopts advanced voltage and constant current technology, which can effectively solve the requirements of LED headlamp for voltage and constant current regulation.
Li-ion battery features: Li-ion battery and cell phone battery charging method is completely different; Li-ion battery has no memory, can be charged at any time.
Please use a charger with anti-overcharge, anti-reverse connection, anti-short circuit function.
Do not use the battery for a long time, should be full of power to save, normal in about three months and then discharged and charged once.
Headlamp in use, according to the requirements of the headlamp on the voltage and battery selection, do not use indiscriminately to prevent burned circuit boards, different models, different voltage batteries do not use at the same time.
In use, turn off the torch when the brightness of the headlamp changes significantly to prevent the battery from being over-discharged.
Heat dissipation techniques: headlamp in use, to ensure that heat dissipation. It is strongly recommended that when the battery is fully charged, it is best to use the second gear first, which allows the headlight and battery of the torch to get extended product life. Can not headlamp light directly into the human eye, super bright and blinding, so as not to affect the eyesight, especially children.
Check the battery: ensure that the battery is charged and installed in the correct direction, do not use different brands of batteries, old and new batteries can not be mixed.
Check the tail cover: make sure the switch is tightened and good contact, ensure that the copper column of the tail cover and the metal piece of the tail cover pressure ring are in good contact, and pay attention to whether the light head is loose.
Package included:
1 x Bike HeadLamp
Note:
- Please do not over-voltage use, the voltage should not exceed 4.2V .
- Battery positive root facing forward, please do not invert, otherwise it will burn the circuit board .
- Pay attention to control the change of headlight temperature to ensure heat dissipation.
- Do not open the circuit board for non-professional personnel.
- Open or handle the circuit board is no longer covered by the warranty.
- Please allow 1-2mm differs due to manual measurement.
- Due to the different display and different light, the picture may not reflect the actual color of the item.
Thank for your understanding.