Precise details:
Introduction:
QC-MINI is a USB DC quick charging power module, which can be used in s olar energy charging, mobile phone charging and other fields.
Product features:
•Support QC2.0, QC3.0
•Supports overvoltage protection
•Support undervoltage protection
•Support overcurrent protection
•Support short circuit protection
•Supports overtemperature protection
•Quick charging will automatically adjust the voltage
•Supports multiple fast charging protocols
•Support overcurrent protection
•Support short circuit protection
•Supports overtemperature protection
•Quick charging will automatically adjust the voltage
•Supports multiple fast charging protocols
Product parameters:
Product name: QC-MINI QC2.0/QC3.0 Rapid charging step-down module
Product Number: QC-Mini
Working voltage: DC6.0V-32V
Output voltage: DC5V(automatically adjusted to 3.0V-12V in fast charging mode)
Output power: 24W
Conversion efficiency: About 95%
Working current: 30mA
Operating temperature range: -20-85
Working humidity range: 0%-95%RH
Size: 38*10*20mm
Input voltage: 6-32V, with reverse connection protection, with fuse.Input voltage, undervoltage protection, output overcurrent protection, short cir cuit protection, machine overtemperature protection.
Output voltage: 3-12V, automatically adjusted according to the protocol, m aximum output power 24W, wired feeder function of output voltage, TVS output protection to protect the phone.
Support fast charging protocol:
•BC1.2 agreement
•Apple agreement
•Samsung Agreement
•QualcommQC2.0 and 3.0
•MTK PE1.1/PE2.0
•Huawei Fast Charging Protocol FCP, matE9 (SCP) is not supported
•Spreadtrum Fast charging Protocol SFCP
Using the step:
1. Connect the right input voltage at the input terminal.
2. Connect the USB device on the USB terminal and use.
Note:
• The default output voltage is 5V, but if connected to a quick charging dev ice, the output voltage will be 3V-12V.
• There is an LED load indicator light, which flashes slightly when no load is on. The larger the load, the higher the brightness.
• Thicker wires are recommended due to high current.The cross section o f the wire is greater than 1.5 square millimeters.
• The wiring cannot be connected backwards, otherwise the module will b e damaged.
• It is a DC power module, so ac power cannot be connected.
• Make sure the input power is greater than the load power.
• If the module is hot, reduce the output power.
• Please read the manual and instructions before use.
Product application:
Solar panels charge your phone
Recharging of car
Auto data recorder power supply
Renovation of domestic power supply
Remind:
Quick charge need agreement fully match to identify, but each manufactur er and brand many phone models, charging ways is very much also, even if the same with qualcom's mobile phone, CPU manufacturers will also ha ve the difference between different charging agreement, it is impossible to fully guarantee that the full original effect as fast as the mobile phone charger may make you incompatible with fast charging. If mind carefully purchase thank you!
Package includes:
1 x USB DC Step-Down Module