Customer Reviews

4.93 out of 5
See all 87 reviews
Write a Review
  • All Reviews (87)
  • Image (7)
  • Video (0)
  • All Star
    • All Star(87)
    • 5 Star(81)
    • 4 Star(6)
    • 3 Star(0)
    • 2 Star(0)
    • 1 Star(0)
Sort by:
Top Review
  • Top Review
  • Most Helpful
  • Most Recent
Reviews only from your country (New Zealand)
Show Original

A part of the review has been auto-translated.

  • 06/12/2021

    The build quality seem very decent for the price. At the top is a rubber cover that protects the USB-C port and SD-card slot. The UTi690A does not have a normal camera so you're completely dependent on the thermal image shown on the display. It does however have both a tiny flashlight and a laser pointer that help in low light situations and if you're completely unsure where you're pointing it at. The menu system feels very responsive and even if the unit have less buttons than most thermal imagers, it's very easy and quick to nagive through the settings. When it comes to what information can be displayed on the screen, the following options are available: Center Point measurement, Hi/Lo Point measurement, Palette, Date&Time. This is quite limited for some use, but for the price point it seem common with these options, and have the feeling that more advanced options may be too much for the processor to handle. For the use I purchased it for, to troubleshoot 3D-Printers it seem to work great. You can easilly see single wires when they heat up as current pass through them, and the measurement at the center point gives the same readings as my FLIR E30bx does. The work range does seem to be quite accurate, you seem to gain additional detail in the images down to a distance of ~10cm from the sensor. I checked if possible to identify PCB-components and did so quite easily down to a size of ~3mm, smaller components than that and you would need an additional ZnSe lens or similar. Overall, happy with the thermal imager for the price paid, it seems to read measurements accurately as my expensive Flir E30bx unit, resolution is just lower. For checking on 3D-printers and other objects of similar size it seems to work great.

    Comments (1)
    Show Original
  • 07/12/2021

    Great device for the price, but it is more expensive than the UTi120S, after review both devices, seems to be the same. The menu system is responsive. Lacks the visible light camera that have more expensive devices, then you cannot mix normal images with thermal images. It is very easy to use and can be an excellent entry device and a replacement device for carry up when you can worry of carry a more expensive device.

    Comments (2)
    Show Original
  • 09/06/2022

    Good, sturdy product. It's waterproof, and shockproof good quality product. The resolution is enough for a home appliances. Overall, itS a best product.

    Show Original
  • 03/05/2022

    Quite decent quality. I really enjoyed it.

    Show Original
  • 13/04/2022

    Very pleased, fulfilled the promise, exactly as described. THANK YOU SO MUCH

    Show Original
  • 20/01/2022

    It arrived promptly, in proper original packaging with usb-c cable and 16gb microsd card. Works like a charm.

    Show Original
  • 24/12/2021

    Packaging was nice , product good quality , they also include sd card . Recommend it

    Comments (1)
    Show Original
  • 09/06/2022

    I used the camera to monitor the living material radiating temperature through the wall +35°C. Also for the distribution of temperature in the greenhouse after the end of the sun (concrete floors and water tanks). If necessary, to monitor electrical switchboards. I am satisfied with the device and its function.

    Show Original
  • 29/04/2022

    For the price is a good product. Seems accurate also. Easy to use. Contained also an SD memory card for storage. Would recommend it if you are not a pro and can get away with the low resolution. Otherwise there is a more expensive model with higher resolution. One thing I did not like is the small white fonts that show the temperature when the background is bright or white. You cannot read the temp then! it is a bit stupid. In general it is good made, good materials and firm grip on hand. Overall for the price very happy.

    Show Original
  • 13/01/2022

    Really nice infrared camera. Note that it does not include the visual camera as an overlay, that being said its infra red camera is high enough resolution to track hot components on a prototype PCB. So it does what I bought it for and it does it well. Its also much cheaper then the dual infrared cameras.

    Show Original

    Total 0 pages

    Go to page


    You might be interested in

    recommendation for you
    • US$27.99
    • US$32.99
    • US$12.31
    • US$32.99
    • US$29.99
    • US$34.99
    • US$3.44
    • US$3.44
    • US$10.34
    • US$20.92
    • US$22.48
    • US$11.49
    • US$12.36
    • US$31.82
    • US$11.99
    • US$6.89
    • US$19.54
    • US$155.99