Thank you

merci

Thank you

It came within a month. The pack is very weak, but it seems to be undamaged. In the photo, two cables, came with one. There's no LPT cable. I'm very disappointed.

Пришло в течении месяца. Упакова очень слабая но вроде без повреждений. На фотографии два кабеля, пришло с одним. Кабеля ЛПТ нету. Я очень разочарован.

It came within a month. The pack is very weak, but it seems to be undamaged. In the photo, two cables, came with one. There's no LPT cable. I'm very disappointed.

perfect

perfect

perfect

AA

AA+

AA

Bit disappointed, the last one I bought a few weeks ago from the same seller came with a serial cable This one didn't Beyond that: Good inexpensive boards Seem to work fine with Mach3 (boards have good pin markings so wiring it is easy) Only downside is they only support 5 input pins per board (so if you get another - mainly to gain extra inputs as I did, be aware that not all the pins can be used as inputs)

Bit disappointed, the last one I bought a few weeks ago from the same seller came with a serial cable This one didn't Beyond that: Good inexpensive boards Seem to work fine with Mach3 (boards have good pin markings so wiring it is easy) Only downside is they only support 5 input pins per board (so if you get another - mainly to gain extra inputs as I did, be aware that not all the pins can be used as inputs)

Bit disappointed, the last one I bought a few weeks ago from the same seller came with a serial cable This one didn't Beyond that: Good inexpensive boards Seem to work fine with Mach3 (boards have good pin markings so wiring it is easy) Only downside is they only support 5 input pins per board (so if you get another - mainly to gain extra inputs as I did, be aware that not all the pins can be used as inputs)

Good little board Inexpensive, Well documented and seems to be well supported in Mach3 Only downside is that if using a pair of boards - you cannot use all the pins as inputs (limited to just the 5 input pins per board)

Good little board Inexpensive, Well documented and seems to be well supported in Mach3 Only downside is that if using a pair of boards - you cannot use all the pins as inputs (limited to just the 5 input pins per board)

Good little board Inexpensive, Well documented and seems to be well supported in Mach3 Only downside is that if using a pair of boards - you cannot use all the pins as inputs (limited to just the 5 input pins per board)