Customer Reviews

4.82 out of 5
Write a Review
  • All Reviews (153)
  • Image (26)
  • Video (3)
  • All Star
    • All Star(153)
    • 5 Star(130)
    • 4 Star(21)
    • 3 Star(1)
    • 2 Star(0)
    • 1 Star(1)
Sort by:
Top Review
  • Top Review
  • Most Helpful
  • Most Recent
Reviews only from your country (New Zealand)
|
Show Original

A part of the review has been auto-translated.

  • 23/02/2021

    easy to assemble and disassemble gravel over a large area 33cmx19cm the software is easy to use I love wifi mode Just like all engravers, you have to make your adjustments before launching the engraving. test on iphone shell, aluminum and even glass it works on the other hand it is necessary to blacken the materials in order to engrave them and even make several passes if necessary. (laser 20w electric -5.5w optical) test on the cutting of thin wood , paper, cardboard and even on a seal sheet to redo motoculture breech joints all without problems. On the other hand, don't expect to make landscapes where even faces in 5 minutes, it takes a lot of time , everything also depends on the size of the drawing.

    Comments
    Show Original
  • 08/01/2021

    Super tool, easy to use and very well suited for engraving of anodized aluminum. I'm thrilled. Tip: always focusing properly then some things work out really well

    Comments (2)
    Show Original
  • 19/03/2021

    Delivery very fast, only 9 days. The laser does everything it promises. I cut 2mm plywood, no problem. write speed and quality is very good. I haven't quite figured out the program yet. I couldn't figure out how to track the interrupt files from the outside.

    Comments (7)
    Show Original
  • 05/01/2021

    great as written remains to try it... delivery to canada 4 day.. but try to take other than canada post it had for 1 month and 3 day.. what about excellent customer service.. 45 minutes for the assembly

    Comments (1)
    Show Original
  • 28/10/2020

    Although proccesing time was a bit high (ordered Oct 4th and shipped Oct 15th) it tooks 13 days to arrive only. No import duties were applied fortunately. BG order team contacted me by email and solve the problem with shipping method. Satisfied. The engraver came well packet, inserted in foam. All parts complete, no damages. The only improvement point can be add an anti-static bag/foam to the controller board. Still pending assembly and first testing. Construction and materials looks robust and there is no signs of wobbling. I bought it cause wireless and standalone operation options. It comes with GRBL 1.1 firmware but can not be used directly with third party software (Lightburn, LaserGRBL, etc) but propietary Vigotec VigoWorks software only instead becasue the ESP32-WROOM has propietary firmware to connect to the CH330N USB interface chip and to the Atmel 328P procesor. However an small modification in the controller board can be done easily to make it compatible :-), using a 4PDT switch and small soldering to allow switch the board between Vigotec mode and third party software mode compatible.

    Comments (4)
    Show Original
  • 20/11/2020

    A very good machine, very precise, pity that it is captive of the software VigoWorks: well but not optimal Works well in Wifi (a little more complicated in W10), works well in SD (but only one GCode file on the SD card) and also works in USB The fan of the 20w laser is rather noisy

    Comments
    Show Original
  • 26/03/2021

    nice product, the pressure on the metal takes a bit long. it's worth getting at least 20w

    Comments (1)
    Show Original
  • 29/10/2020

    Received very fast, it came all right and it is a great product. I enjoyed it very much!

    Comments (8)
    Show Original
  • 17/05/2021

    My laser arrived today, 10 days after ordering, I am lmpressed with the delivery speed. The machine was easy to put together and was up and running within a hour of me snatching it out of postie's hands and scuttling off to the workshop. The software is easy to navigate and there is a good choice of connectivity, USB, WiFi, WiFi Hotspot and SD card so there is something for every one. I mported a picture of my daughter's horse and lasered it on to a piece of Maple faced ply. The results are very pleasing for a first attempt. I can highly recommend the VigoTec VG-LX7 as a well priced entry level laser engraver that punches above it's weight....

    Comments
    Show Original
  • 03/11/2020

    Very good very good He arrived on time It cuts beautifully

    Comments
    Show Original
Show:

    Total 0 pages

    Go to page

    Go

    You might be interested in

    recommendation for you
    • NZD$297.27
    • NZD$797.42
    • NZD$268.13
    • NZD$295.42
    • NZD$408.02
    • NZD$416.96
    • NZD$242.89
    • NZD$393.45
    • NZD$451.38
    • NZD$456.39
    • NZD$575.61
    • NZD$470.91
    • NZD$143.82
    • NZD$378.88
    • NZD$344.40
    • NZD$391.44
    • NZD$293.69
    • NZD$184.33