Customer Reviews

5 out of 5
See all 22 reviews
Write a Review
  • All Reviews (22)
  • Image (2)
  • Video (0)
  • All Star
    • All Star(22)
    • 5 Star(22)
    • 4 Star(0)
    • 3 Star(0)
    • 2 Star(0)
    • 1 Star(0)
Sort by:
Top Review
  • Top Review
  • Most Helpful
  • Most Recent
Reviews only from your country (United States)
|
Show Original

A part of the review has been auto-translated.

  • 09/08/2020

    I received V1.4 of this board... it has slight changes to the I/O configuration. These boards are just a blast to work with. Have a look at https://www.thingiverse.com/thing:4565213 for a 3D printed case design in openscad. Software support for these is through the Arduino IDE and libraries from https://github.com/fdivitto/FabGL. If you like esp32, you need more than one of these boards. It can even emulate a whole Altair Z80 computer box and terminal in a few cubic inches or a VIC20 or run all kinds of ancient video games (prehistoric stuff from the 70's or 80's!)..

    Comments (1)
    Show Original
  • 22/11/2019

    Connect a PS/2 mouse and keyboard and VGA monitor to this board, add power - from a USB micro socket - and the microcontroller initialises, providing a simple GUI environment with windows, buttons, timers and text fields, which you can test with the simple interface. It's fast, it multitasks (you can use more than one item at the same time) and it's re-programmable, though as yet, I haven't researched how to do that. One drawback is that in this ever-advancing age of consumer electronics, VGA monitors and PS/2 mice & keyboards might be hard to find, though some USB mice and keyboards can emulate PS/2 if you use an adaptor. If you are buying a new keyboard for this application, please be sure to check that you can use such an adaptor.

    Comments
    Show Original
  • 16/08/2021

    I am very satisfied with the product. Delivery time is at the satisfactory level. However, the packaging did not have any mechanical protection and the box in which the product was delivered was arrived deformed and crushed. Fortunately, the product was not damaged. -->In the future, I would expect product packaging to be improved by adding some Packaging Foam, Bubble Bags or similar. -->I tried the product and tested several VGA and audio sketches uploaded via the Arduino IDE tool. I recommend this great product for various vintage computer emulators and retro video games development.

    Comments
    Show Original
  • 07/08/2021

    I took the chip model cp2104 Different from the photographic description. The underside: - The SD card reader is on the bottom right after the TTGO processor. - The soldering connector in the center on the left has 8 slots (4 in the picture). Top = 3v3 GND IO39 IO34. Bottom IO12 IO14 IO13 IO2 - The IO36 switch is located at the bottom left. The reset remains in position on the right. The top: - The VGA-side connector and jack are inverted - The battery connector is for a CMS surface component

    Comments
    Show Original
  • 27/10/2021

    Working well, I have tried with Amstrad CPC emulator. (tf card,wifi, BT are not tested yet) shipping: Banggood Express ship from CN There was no additional cost on Hungarian side

    Comments
    Show Original
  • 06/07/2021

    Incredible little board. All of the features of the ESP32 with the ability to use a full size monitor, keyboard, and mouse! I recommend the FabGL library for your projects.

    Comments
    Show Original
  • 02/04/2021

    Unit appears super fine, looking forward to experimenting with it. Although it is advertised as V1.1, the unit I received was actually V1.4. Which is a good thing, I believe? Not sure what the difference is, but I am assuming that newer is better. :-)

    Comments
    Show Original
  • 09/02/2021

    OK. Perfect, new version 1.4. Arrived quickly. I recommend updating the drives (I use Win10) USB 'CP210x USB to UART Bridge VCP Drivers - Silicon Labs' (https://www.silabs.com/developers/usb-to-uart-bridge-vcp-drivers). Raffaele

    Comments
    Show Original
  • 28/09/2021

    Received in good order, cant wait to fire it up!

    Comments
    Show Original
  • 21/05/2021

    Received 1.4. Excellent product

    Comments
    Show Original
Show:

    Total 0 pages

    Go to page

    Go

    You might be interested in

    recommendation for you
    • US$43.27
    • US$17.99
    • US$77.99
    • US$6.99
    • US$5.99
    • US$25.99
    • US$42.99
    • US$4.99
    • US$18.79
    • US$14.99
    • US$7.99
    • US$43.59
    • US$2.99
    • US$49.99
    • US$13.99
    • US$45.99
    • US$8.99
    • US$57.99