Customer Reviews

4.94 out of 5
See all 910 reviews
Write a Review
  • All Reviews (910)
  • Image (86)
  • Video (1)
  • All Star
    • All Star(910)
    • 5 Star(867)
    • 4 Star(35)
    • 3 Star(6)
    • 2 Star(0)
    • 1 Star(2)
Sort by:
Top Review
  • Top Review
  • Most Helpful
  • Most Recent
Reviews only from your country (New Zealand)
|
Show Original

A part of the review has been auto-translated.

  • 04/02/2020

    Cool little display, but beware that there is a "dead" row of pixels between the yellow and blue parts. The driver chip is NOT SSD136 as the description says, its SSD1306. I used it with with an ESP32 and Adafruit_SSD1306 library and it works fine if you use adress 0x3C and OLED_RESET -1 instead of the defaults in the examples.

    Comments (1)
    Show Original
  • 18/11/2019

    These OLEDs are my go-to displays now for my projects. Way better than LCD displays. In this particular one, the top 16 pixels are yellow and the rest are blue. I2C only needs 4 wires. The SSD1306 (not SSD136) library is easy to use. There are tutorials everywhere on how to use these. Remember the address on these is usually 0x3C. I ordered some plastic shells for these displays - can't wait to get them! Here's some sample code for how I made the display on an Arduino: /************************************************************************** Display Banggood BLUE/YELLOW OLED **************************************************************************/ #include #include #include #include #define SCREEN_WIDTH 128 // OLED display width, in pixels #define SCREEN_HEIGHT 64 // OLED display height, in pixels // Declaration for an SSD1306 display connected to I2C (SDA, SCL pins) #define OLED_RESET 4 // Reset pin # (or -1 if sharing Arduino reset pin) Adafruit_SSD1306 display(SCREEN_WIDTH, SCREEN_HEIGHT,&Wire,OLED_RESET); void setup() { Serial.begin(9600); display.begin(SSD1306_SWITCHCAPVCC, 0x3C); display.clearDisplay(); display.setTextColor(WHITE); } void loop() { display.clearDisplay(); display.drawRect(0, 0, 128, 64, WHITE); display.fillRect(0,0,128,64,WHITE); display.setCursor(0,0); display.setTextColor(BLACK); display.setTextSize(2); display.print(" YELLOW"); display.setCursor(0,32); display.setTextColor(BLACK); display.print(" BLUE"); display.display(); }

    Comments
    Show Original
  • 17/11/2019

    Very convenient for projects where a small and simple yet powerful display is needed and requiring only 2 wires to control, it can be used with many small micros. Its wide supply voltage is also very convenient making it suitable for 3.3V and 5V systems. Many tutorials and libraries for using this module can be found around the internet.

    Comments
    Show Original
  • 07/01/2021

    At last OLED in a box. The last 3 times the OLED came broken, but this time came in perfect condition. Working as expected. The yellow colour is only at the top, the rest OLED has blue colour.

    Comments
    Show Original
  • 10/04/2015

    Très bon produit, très lumineux et très compact. Vidéo tutorial: https://www.youtube.com/watch?v=A9EwJ7M7OsI Compatible avec librairie Adafruit_SSD1306_OLED et Adafruit_GFX https://github.com/adafruit/Adafruit_SSD1306 https://github.com/adafruit/Adafruit-GFX-Library Connexions: VCC: 3.3V ou 5V GND: GND Arduino SCL: Pin A5 (Arduino UNO) SDA: Pin A4 (Arduino UNO)

    Comments (1)
    Show Original
  • 28/02/2018

    The display arrived very quickly. Packaging was effective. I connected it to an Arduino Nano and with the u8g2 libraries (U8G2_SSD1306_128X64_NONAME_1_HW_I2C) it worked just fine. The first upper lines are in yellow, with the lower in light blue. Between the two color areas there are apparently no pixels, so when drawing an image spanning the areas it appears 'separated' (see photos). Knowing that, the display is bright, very clear, sharp and readable (if you have good eyesight, 0.96 inch is tiny !).

    Comments
    Show Original
  • 20/05/2017

    Very clear and easy to read display. Easy to drive with 5V and Arduino library from Adafruit with I2C address set to 0x3C. Note that this display is monochromatic, meaning that the pixels are fixed single color with top section only being yellow and bottom being blue.

    Comments
    Show Original
  • 10/05/2016

    Very small (display itself 15*27mm) but very sharp display. Great contrast. Tested it with arduino nano and adafruit ssd1306 library (https://github.com/adafruit/Adafruit_SSD1306). Set I2C-address in sketch to 0x3C (not 0x3D) and connect A4 to SDA and A5 to SCL and display works like a dream. NOTE: Also needs adafruit gfx-library (https://github.com/adafruit/Adafruit-GFX-Library)

    Comments
    Show Original
  • 08/10/2017

    Perfect for projects that need graphics to be displayed without using too many pins.

    Comments
    Show Original
  • 09/02/2021

    Excellent 2 color screen. I use it for the hotspot together with mmdvm and the rasberry pi zero w. Very sharp and bright. I highly recommend it.

    Comments
    Show Original
Show:

    Total 0 pages

    Go to page

    Go

    You might be interested in

    recommendation for you
    • US$21.51
    • US$9.24
    • US$37.94
    • US$13.79
    • US$64.39
    • US$80.49
    • US$45.99
    • US$68.99
    • US$27.59
    • US$44.84
    • US$18.94
    • US$64.39
    • US$68.36
    • US$19.54
    • US$27.59
    • US$13.79
    • US$44.84
    • US$11.36