I love these supplies. I used them to build a variable DC supply for my bench. I changed the pots for panel mount 10 turn pots and fed these supplies(3) with a high current 24V supply. Most of the parts for this project were source from banggood including the laser to engrave the front panels.

I love these supplies. I used them to build a variable DC supply for my bench. I changed the pots for panel mount 10 turn pots and fed these supplies(3) with a high current 24V supply. Most of the parts for this project were source from banggood including the laser to engrave the front panels.

I love these supplies. I used them to build a variable DC supply for my bench. I changed the pots for panel mount 10 turn pots and fed these supplies(3) with a high current 24V supply. Most of the parts for this project were source from banggood including the laser to engrave the front panels.

Incredibly small but very good! Order arrived without delay and without problems, nothing damaged and well packaged. I have already tested and was very pleased, I put in the entrance 22 Volts DC taken from my source and was regulating the output and took several voltages as you can see in the photos. So I recommend it, it didn't heat up and finally I say it's a good regulator from DC to DC. We must be careful not to exceed the maximum voltage allowed by the manufacturer. Thank you Banggood

Incrivelmente pequeno, mas muito bom! A encomenda chegou sem atrasos e sem problemas, nada danificado e bem embalado. Já testei e fiquei muito contente, coloquei na entrada 22 Volts DC retirados da minha fonte e foi regulando a saída e tirei várias voltagens como podem ver nas fotos. Por isso recomendo, não aqueceu e por fim digo que é um bom regulador de DC para DC. Temos que ter atenção em não ultrapassar a voltagem máxima permitida pelo fabricante. Obrigado Banggood

Incredibly small but very good! Order arrived without delay and without problems, nothing damaged and well packaged. I have already tested and was very pleased, I put in the entrance 22 Volts DC taken from my source and was regulating the output and took several voltages as you can see in the photos. So I recommend it, it didn't heat up and finally I say it's a good regulator from DC to DC. We must be careful not to exceed the maximum voltage allowed by the manufacturer. Thank you Banggood

this voltage and current converter is Ok. it works properly. I have no problems with it. only need to replace the controllers for rotary and larger. I am satisfied This convert and converter is Ok. works together. I have no idea with it. it is only used to protect the ingredients with rotary and chemical uses. I am protected

tento menič napätia a prúdu je Ok. funguje správne. nemám s ním žiadne problémy. len je potrebné vymeniť regulátory za otočné a väčšie. som spokojný this voltage and current converter is Ok. works properly. I have no problems with it. it is only necessary to replace the regulators with rotary and larger ones. I am satisfied

this voltage and current converter is Ok. it works properly. I have no problems with it. only need to replace the controllers for rotary and larger. I am satisfied This convert and converter is Ok. works together. I have no idea with it. it is only used to protect the ingredients with rotary and chemical uses. I am protected

Good stuff! One heatsink gets real hot though when (in my case) input is 19.5 volt to output 12.6 volt @ 4 amps. Installed a fan to fix it.

Good stuff! One heatsink gets real hot though when (in my case) input is 19.5 volt to output 12.6 volt @ 4 amps. Installed a fan to fix it.

Good stuff! One heatsink gets real hot though when (in my case) input is 19.5 volt to output 12.6 volt @ 4 amps. Installed a fan to fix it.

A good Step Down module, that can regulate Voltage and Current. Not the first time I use this product. Notice that the functions of the pot are not indicated on the board. With a voltmeter it's easy to see which one is for voltage and which one for current. Be careful, mine has one power transistor isolation pad not really fully covering the heating. The screws were not tide too. I will recommand a little inspection before use. The two 10 kohms pots can be replaced by external one if you need.

A good Step Down module, that can regulate Voltage and Current. Not the first time I use this product. Notice that the functions of the pot are not indicated on the board. With a voltmeter it's easy to see which one is for voltage and which one for current. Be careful, mine has one power transistor isolation pad not really fully covering the heating. The screws were not tide too. I will recommand a little inspection before use. The two 10 kohms pots can be replaced by external one if you need.

A good Step Down module, that can regulate Voltage and Current. Not the first time I use this product. Notice that the functions of the pot are not indicated on the board. With a voltmeter it's easy to see which one is for voltage and which one for current. Be careful, mine has one power transistor isolation pad not really fully covering the heating. The screws were not tide too. I will recommand a little inspection before use. The two 10 kohms pots can be replaced by external one if you need.

Ordered 5.11,2021 was delivered by courier from Shipment 17.11.2021.Not tested yet

Objednáno 5.11,2021 dovezl kurýr ze Zásilkovny 17.11.2021 .Zatím nevyzkoušeno

Ordered 5.11,2021 was delivered by courier from Shipment 17.11.2021.Not tested yet

Arrived in Algeria

تم وصولها الى جزائر

Arrived in Algeria

Delivered promptly, according to the schedule, everything works.

Delivered promptly, according to the schedule, everything works.

Delivered promptly, according to the schedule, everything works.

perfect thing for setting LED current

perfect thing for setting LED current

perfect thing for setting LED current

It's okay. Thank you! CV mode - red LED, CC mode - blue LED.

Всё нормально. Спасибо! Режим CV - красный светодиод , режим CC - синий светодиод.

It's okay. Thank you! CV mode - red LED, CC mode - blue LED.