Customer Reviews

4.61 out of 5
See all 23 reviews
Write a Review
  • All Reviews (23)
  • Image (5)
  • Video (0)
  • All Star
    • All Star(23)
    • 5 Star(18)
    • 4 Star(2)
    • 3 Star(2)
    • 2 Star(1)
    • 1 Star(0)
Sort by:
Top Review
  • Top Review
  • Most Helpful
  • Most Recent
Reviews only from your country (United States)
|
Show Original

A part of the review has been auto-translated.

  • 30/08/2021

    This kit comes complete with almost everything you need to make it work on an ender 3 V2. There are two issues with the kit as supplied. 1) for the V2 the hot end shroud doesn't work with the included bracket. The included bracket is for the Ender 3 regular printer not the V2. I had to fabricate a bracket from my old bracket and the belt slots don't line up right. 2) the m3x8 screws for the bearing blocks are too long and they should be m3x6 for x and 1 z axis, but are okay for y and motor side z axis. There are NO way instructions so figuring it all out is hard. There are a few YouTube videos that help if you get lost. Overall I'm happy with the kit and it's an upgrade, but not complete as shipped. The BLtouch is a nice bonus for the price!!!!

    Comments (1)
    Show Original
  • 22/04/2021

    good kit,need little brain ro put it together

    Comments (4)
    Show Original
  • 14/07/2021

    poorly packed and guide rails missing the small cap to stop the carage from falling of the rails.

    Comments (1)
    Show Original
  • 24/07/2021

    Seems great!

    Comments
    Show Original
  • 08/09/2021

    package extremly poor, lineals rods out of the guides, no foam or any to protect the items

    Comments
    Show Original
  • 09/02/2021

    Caution! This kit is for an Ender 3 Pro only, i.e. make sure your Y axis is on a 40x40mm profile. It can be adapted to the other Ender 3 models with the 20x40mm Y axis, but it requires drilling new holes to the Y carriage and 3D printing the Y axis ends. The product itself is very well built, it takes some time to get it assembled properly. I had the Z axis binding after assembly. After loosening the Z extrusions at the top and bottom, then tightening them back up again, everything was fine.

    Comments (1)
    Show Original
  • 18/03/2021

    No instructions, the right Z axis bracket was mirrored so the X axis was limited by 2cm because the printer head was hit by the bracket. I have a swiss direct drive so the motor get stuck by the bracket.

    Comments
    Show Original
  • 04/01/2021

    Sinceraly I don´t like, because where is the manual to help in the assemblyjQuery111306169553782189643_1609800210291?

    Comments
    Show Original
  • 06/07/2021

    To Poland from the Czech Republic in 4 working days, also exactly as described. Shipping Inpost. Order's fine.

    Comments
    Show Original
  • 28/06/2021

    great kit to upgrade the Ender 3 printer. Now I can print with faster speed and maintaining a really good precision

    Comments
    Show Original
Show:

    Total 0 pages

    Go to page

    Go

    You might be interested in

    recommendation for you
    • US$3.99
    • US$259.00
    • US$3.29
    • US$206.00
    • US$5.99
    • US$24.99
    • US$212.00
    • US$107.99
    • US$1.99
    • US$12.99