Great buy, works as described, upgrading my rock crawler.

Great buy, works as described, upgrading my rock crawler.

Great buy, works as described, upgrading my rock crawler.

He's on time. Very good piece Thank you

Ηρθε στην ώρα του. Πολύ καλό κομμάτι Ευχαριστώ

He's on time. Very good piece Thank you

Good shipping but not tested.

Good shipping but not tested.

Good shipping but not tested.

Quick delivery good quality. Haven’t tried as I’m just starting little build.

Quick delivery good quality. Haven’t tried as I’m just starting little build.

Quick delivery good quality. Haven’t tried as I’m just starting little build.

Found these can handle a lot more if you split the motor power supply and MCU and connect the motor directly to the battery. Stops ESC resetting when loading BEC or running low resistance motors.

Found these can handle a lot more if you split the motor power supply and mcu and connect motor direct to battery. Stops esc reseting when loading bec or running low resistance motors.

Found these can handle a lot more if you split the motor power supply and MCU and connect the motor directly to the battery. Stops ESC resetting when loading BEC or running low resistance motors.

All is well. Fast delivery. Item is as described.

Alles ok. Schnelle Lieferung. Artikel ist wie in Beschreibung.

All is well. Fast delivery. Item is as described.

Works well

jól működik

Works well

Does not work

Virker ikke

Does not work

I can't say this is a bad ESC. According to the datasheet of the voltage regulator (marked as 78M05) providing 5V to the regulator used in this ESC, the current is specified as 0.5A. If there are any issues, try adding a 6V 200uF capacitor between GND and 5V. This helped me when using the Dumborc x6f receiver with this regulator.

Не могу сказать, что это плохой ESC . по даташиту стабилизатора (маркировка 78M05) напряжения 5v для питания регулятора, который в этом ESC стоит, заявленный ток 0.5A. если можно дополнить отзыв, скажу, сколько потянет. если есть какие нибудь проблемы с работой, попробуйте поставить между GND и +5V конденсатор от 6v 200 мкФ. мне это помогло при связке Dumborc x6f приемника и данного регулятора.

I can't say this is a bad ESC. According to the datasheet of the voltage regulator (marked as 78M05) providing 5V to the regulator used in this ESC, the current is specified as 0.5A. If there are any issues, try adding a 6V 200uF capacitor between GND and 5V. This helped me when using the Dumborc x6f receiver with this regulator.

Not yet tested, but delivery came quickly

Noch nicht getestet, aber Lieferung kam schnell

Not yet tested, but delivery came quickly