Customer Reviews

4.87 out of 5
Write a Review
  • All Reviews (156)
  • Image (45)
  • Video (1)
  • All Star
    • All Star(156)
    • 5 Star(139)
    • 4 Star(14)
    • 3 Star(3)
    • 2 Star(0)
    • 1 Star(0)
Sort by:
Top Review
  • Top Review
  • Most Helpful
  • Most Recent
Reviews only from your country (New Zealand)
|
Show Original

A part of the review has been auto-translated.

  • 09/08/2020

    Shipping took 3 work-days and the printer came partly assembled and nicely packaged. The printer has a steel sheet-metal frame with some magenta-metallic aluminum parts and some 2020/2040 aluminum V-Slot profiles. Stiff coupler for the z-Motor and ferrules! The frame is reasonable stiff for a printer and the assembly was easy thanks to the great pdf-manual on a SD-Card and the video on the Biqu-youtubechannel. Every bag of screws is labeled and you also get some spares as well as any tool or wrench you need. The Cablemanagement is great and you are supplied with enough cableties. The type-C cable makes maintanance on the hotend easy and you dont have to deal with multiple cables at all. My bowden was a little short and was bending a bit much, 5cm longer would solve this. The hotend is a grub screw clamped V6 hotend 0.4mm nozzle and two spares. The heatbed is a 3mm aluminum-PCB with a magnetic pad and a springsteelsheet. It works very well and heats up to 250°/80° in 5-7 min. Unfortunately my bed is not flat, so at some point I will have to buy a BL-Touch for autoleveling to compensate that. The TMC-Driver make this printer as silent as a Prusa but this is mitigated by the case and driver-cooling fans which are as loud(48dB@1m) as a hairdryer on lowest level. You cant tell if the printer is running or not! These must be replaced if you consider printing in a livingroom. Touchscreen is bright, responsive and has many configuration options. I also had to adjust the steps-per-mm-value of x and y from 81.5 to 80.00 to get my parts to nearly the correct size. I dont understand why they choose these values in the first place since 80.00 is the calculated standard value for this assembly. The printquality is very good and bed adhesion is fantastic. All in all this printer is a very good deal, but it has some flaws which should be fixed or adressed. Its maybe not the best for a total beginner, but with a little bit of finetuning you could turn this into a great printer.

    Comments (1)
    Show Original
  • 08/07/2021

    It came well packaged, but it didn't come with the SD card unfortunately, it comes with 50 grams of PLA that you can play with a little, easy assembly, and it already prints with very good quality from the box, I didn't have to do anything other than the table alignment to get the prints on top quality. Would recommend for beginners.

    Comments (3)
    Show Original
  • 19/09/2020

    Received my BIQU B1 yesterday. Done several hours of print with Ender 3 pro and decided to upgrade. Ender's tooo loud.  Not great first impression with Biqu B1.  There are few issues  1. Bed under the metal sheet got uneven surface because of four supporting screws not being flat with the bed surface! I got bumps in all 4 corners, it will make bed levelling much harder. Wonderin how to fix that?  2. Circle fan duct on hot end is broken on one corner (screw loop feel off). I don't have clear filament to reprint it :( 3. Power supply main "+" red cable was totally loose by motherboard connector. Remember to open the bottom and check all connections. You would have to anyway at some point - sd card card will end up inside the case no meter how careful you are. 4. Power supply is generic model non branded (hoping it will last and have enough power), Ender comes with MeanWell.

    Comments (2)
    Show Original
  • 29/07/2021

    Five stars! Sensational! It is easy to assemble and the manual is very explanatory, hardly need to read. The pieces are all numbered and the tools are coming up to assemble. In a matter of software, the firmware installed in it is very good. It's practically assemble and leave printing. Of course, for a beginner it requires some study but I was able to print my favorite piece as soon as I finished putting it together. Really sensational! A differential is the led illuminating the print bed. Only one detail I missed was the memory card that didn't come to me. I am very pleased also with Banggood's fare insurance. I was redeemed with the full value of the customs fee and it was very quick. I was very well attended by the staff. Congratulations!

    Comments (1)
    Show Original
  • 17/12/2020

    Shipping took 3 work-days and the printer came partly assembled and nicely packaged. The printer has a steel sheet-metal frame with some magenta-metallic aluminum parts and some 2020/2040 aluminum V-Slot profiles. Stiff coupler for the z-Motor and ferrules! The frame is reasonable stiff for a printer and the assembly was easy thanks to the great pdf-manual on a SD-Card and the video on the Biqu-youtubechannel. Every bag of screws is labeled and you also get some spares as well as any tool or wrench

    Comments
    Show Original
  • 03/01/2021

    super well packed, a lot of good quality foam, the printer is very easy to mount and quality of the box is good, after some upgrades is now almost perfect

    Comments (2)
    Show Original
  • 02/09/2020

    The device was already there 3 days after the order. But first 5 stars. To the printer, it"s really a super out of the box device. Unpacking up to go. I didn"t have to calibrate anything or do anything else. The only drawback where neither the device nor the manufacturer what can be for is the power supply has not survived the shipping. The coil in the power supply has come loose and is ripped out of the PCB by which the power supply had to be replaced by another one (I would recommend it to everyone anyway as it was a cheap no name power supply). Despite all this I am more than satisfied with the device and would recommend it to anyone who has already gained some experience in 3d printing.

    Comments
    Show Original
  • 30/04/2021

    Didn't like it didn't totally come with the right color, without the gift duck, no SD card ; Pr make the first impression of the test not liking 👎🏿

    Comments
    Show Original
  • 08/08/2020

    I own many 3d printer but for sure this is the best one . high quality materials. biqu have put a lot of effort on this product. I recommend 100% . biqu have the best customer service. great results with pla and petg . going to order another soon for my farm

    Comments
    Show Original
  • 22/07/2021

    Product came as described, already tested and works perfectly, was delivered very fast and the insurance covered the customs fees. I recommend the seller.

    Comments
    Show Original
Show:

    Total 0 pages

    Go to page

    Go

    You might be interested in

    recommendation for you
    • NZD$202.21
    • NZD$647.83
    • NZD$475.23
    • NZD$577.77
    • NZD$274.07
    • NZD$166.10
    • NZD$563.12
    • NZD$298.99
    • NZD$460.78
    • NZD$747.50
    • NZD$273.00
    • NZD$274.07
    • NZD$590.79
    • NZD$576.34
    • NZD$614.61
    • NZD$762.46
    • NZD$576.34
    • NZD$134.34