A part of the review has been auto-translated.
Super clear and good quality. Looks so nice being able to see the filament inside. Used some boiling water and was able to straighten the coil out really easily. If you want a clear tube, this is the one to get
great tube
very good. almost see through
Best recent upgrade!!! You can now see how far filament has gone in/out while feeding and if the filament has got squashed or damaged by the extruder. It is not perfectly transparent but you can easily see the shape of the end as it is coming out, you can detect larger dents in the filament (e.g. if it has been ground down by the extruder), you can almost see the little dents from the teeth of the extruder. You can obviously see what colour filament you have installed, without having to extrude any to check (e.g. on my setup I cannot see the spool or the filament going into the extruder, on the webcam, but I [now] can see what's coming out in the feed tube - with this one). Fantastic!!! If you are not printing flexible filaments this is a better option than Capricorn (where only the narrower inside diameter and higher temperature may be of benefit).
very good
Everything i. O.
conforms to the description