Precise details:
Specifications:
Product name | Portable Electric Air Pump |
Product Model | HT-767 |
Product size | 28*23.1*13.1cm |
Box size | 74.5*31.5*36cm |
Product Air Pressure | 0.5-20PSI |
Product Power | 110W |
Product airflow | Low 350L/min,High 70L/min |
Product noise | ≤85dB |
Cable length | 3m |
Product weight | 1.97KG |
Single gross weight | 2.3KG |
Packing size | 30*24*17cm |
Power supply type | 12V car power supply |
Product Material | ABS |
Length of wave tube | 1m |
Features:
1. [Built-in inflator and deflator] The pressure (vertical paddle board) pump is up to 20 PSI, which is very suitable for high-pressure inflation. It can quickly inflate and deflate tents and other inflation.
2.ã€Digital pressure LCD screen and automatic shutdown】Accurate air pressure value, accurate to 0.01PSI. The selectable pressure unit is PSI/Bar, so you can set the pressure at your target level to prevent over-inflation. Choose the pressure you want, then pump directly and stop by itself. Fully automatic operation makes it easy to inflate inflatable tents, inflatable rafts, and kayaks.
3.[Scope of Use] Suitable for surfboards/paddleboards, and most inflatable products, (applicable for inflatable paddle boards, assault boats, inflatable boats, air beds, pools, air cushion sofas, inflatable tents, etc.)
4.Dual motor design, integrated high pressure pump, suitable for inflatable pulp boards, submersible boats etc.
5.Easy to operate, with handle for easy extraction.
Package Included:
1 x Electric Air Pump
7 x Air nozzles
1 x Inflator tube
Notes on use
1. All power supplies must be 12V DC.
2. Do not block the air inlet at the bottom of the air pump, ensure that the air inlet is kept clear at all times.
3. Do not operate the product when there is damage to the hose, please replace the hose immediately.
4. Do not remove the hose while the product is working on inflation, the high pressure may cause you harm, stop working and then remove the hose.
5. Do not make the air pump work continuously for more than 30 minutes, the motor overheating may lead to internal damage please cool down for 30 minutes after the air pump has worked continuously for 30 minutes. Do not use the pump under high temperature exposure!
6. If any part is damaged, please do not use this air pump, please contact a professional for repair.
7. This product must not be exposed to rain or water.
8. To avoid danger, the air pump must not be pointed at the air inlet when working 9. Do not block the air inlet and the cooling holes around the product to ensure that the air inlet is kept clear at all times.
10. Do not leave the product while it is in use.
11. Please start the car when the product is in use to avoid unnecessary damage.